- Name
- In-Wall Smart 1000W Dimmer
- Brand
- GE
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3039
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.19
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x4944
- Long description
- Transform any home into a smart home with the GE Z-Wave Smart 1000W Dimmer. The In-Wall Smart 1000W Dimmer can easily replace any standard in-wall switch and remotely controls a light in your home. Your home will be equipped with ultimate flexibility with the GE Z-Wave Smart 1000W Dimmer, capable of being used by itself or with up to four add-on switches. Screw terminal installation provides improved space efficiency when replacing existing switches and the integrated LED indicator light allows you to easily locate the switch in a dark room. The GE Z-Wave In-Wall Smart 1000W Dimmer is compatible with any Z-Wave certified gateway, providing access to many popular home automation systems. Take control of your home lighting with GE Z-Wave Smart Lighting Controls! Z-Wave is the world’s largest ecosystem of inter operable smart home products. Z-Wave lighting controls provide an easy-to-install and affordable system to control lighting and small appliances in your home. Add GE Z-Wave lighting controls to a Z-Wave certified gateway to access and control your home from anywhere in the world using your smartphone, tablet or computer as a home automation command center. Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. Create customized lighting scenes for any occasion such as a “go to sleep” scene or a “movie night” scene. Give the illusion that someone is home by programming the lights to turn on/off while you are away—perfect for deterring crime and adding additional security!"
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the GE Z-Wave Smart 1000W Dimmer.
- Product identifier
- 14299/ZW3006
- Countries / regions
- United States of America
- Certification number
- ZC10-17015390
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 7
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value white firmware updatable value updatable by consumer by rf switch load capacity watts value 1000 neutral wire required association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 1 99 number of steps or levels 8 dim rate adjustments dim rate adjustments when receiving a z wave dim command 0 2 0 0 3 from to description 1 255 timing of steps 9 dim rate adjustments dime rate adjustments when manually controlled dimming 0 1 0 0 1 from to description 1 99 number of steps or levels 10 dim rate adjustments dim rate adjustments when manually controlling dimming 0 2 0 0 3 from to description 1 255 timing of steps 11 dim rate adjustments dim rate adjustments when receiving an all on or all off command 0 1 0 0 1 from to description 1 99 number of steps or levels 4 invert switch if the switch is accidentally installed upside down with “on” at the bottom and “off” at the top, the default on/off rocker settings can be reversed by changing parameter 4’s value to “1”. 0 1 0 0 0 from to description 0 0 default 1 1 invert switch 3 led light when shipped from the factory, the led is set to turn on when the connected light is turned off. this is the default setting and can be changed if your primary controller supports the node configuration function. to make the led turn on when the light is turned on, change parameter 3’s value to “1”. to turn the led off at all times, change parameter 3’s value to 2. 0 1 0 0 0 from to description 1 1 led on when load is on 0 0 default 2 2 led always off texts
- ID Description Value 1