- Name
- Direct-Wire Outdoor Smart Switch (40 Amp)
- Brand
- GE
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- Energy Meters, All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x3032
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 255 FW: 5.53
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.81.01
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x4F44
- Long description
- Transform any home into a smart home with the GE 40 Amp Z-Wave Direct-Wire Indoor/Outdoor Smart Switch. When added to a Z-Wave network, the heavy duty switch enables wireless control of on/off functions for large load, hard-wired applications such as waters heaters, landscape lighting, spas, pool pumps and heaters. The Smart Switch can be used indoors or outdoors and features an easy access wire connection block, front mounted LED lights indicating power and on/off status, and an override switch to turn connected devices on or off manually. The Smart Switch is housed in a lockable, tamper-resistant case to ensure settings and wiring are secure. The rugged, weather-resistant design will keep out dirt and debris while being suitable for use in extreme weather conditions. The GE Z-Wave Direct-Wire Outdoor Smart Switch is also equipped with state-of-the-art energy monitoring capability, allowing you to monitor watts and kilowatt hours, helping you keep your energy costs to a minimum. Take control of your home lighting and large load devices with GE Z-Wave Smart Lighting Controls!
- Hardware platform
- ZM5202
- Short description
- When added to a Z-Wave network, this direct-wire switch enables wireless control of on/off functions for large load applications.
- Product identifier
- 14285/ZW4007
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC10-18056123
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported / controlled meter types
- Meter Type Rate Type Description Electric meter
- Value updatable by consumer by rf loads controlled value 2 outdoor use supported meter type value electric energy z wave scene type value scene & central scene association groups
- Group Number Maximum Nodes Supported End Point ID Description 3
- From to description 0 0 return to last state 1 1 return to off 2 2 return to on 2 energy report mode reporting mode 0 1 0 0 0 from to description 0 0 once monthly 1 1 device reports based on parameter 3 setting (every 5 60 minutes) 2 2 once daily 3 energy report frequency reporting frequency 0 1 0 0 0 from to description 5 60 5 minutes (default) 60 minutes (max) texts
- ID Description Value 5