- Name
- In-Wall Smart Motion Switch
- Brand
- GE
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- Sensors, All Lighting Devices, On/Off Switches/Devices, Security Add-Ons
- Product id
- 0x3032
- Device type
- On/Off Power Switch
- Oem version
- HW: 255 FW: 5.56
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x494D
- Long description
- Transform any home into a smart home with the GE In-Wall Smart Motion Switch. This Z-Wave device replaces you current light switch using your existing wiring and provides Z-Wave wireless control of overhead lighting. The switch enables wireless control of On/OFF functions of incandescent, LED, xenon, halogen and fluorescent lighting. Not only does it act as a switch but the GE In-Wall Smart Motion Switch has a built in PIR sensor which can control the local and be set in occupancy or vacancy mode.
- Hardware platform
- ZM5101
- Short description
- Transform any home into a smart home with the GE In-Wall Smart Motion Switch.
- Product identifier
- 26931/ZW4006
- Countries / regions
- United States of America
- Certification number
- ZC10-16105294
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Value updatable by consumer by rf sensors value motion/no motion (binary) neutral wire required association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 0 0 disabled 1 1 enabled 3 operation mode 1 – manual 2 – vacancy 3 – occupancy 0 1 0 0 3 from to description 1 1 manual 3 3 occupancy 2 2 vacancy 2 change brightness of associated light bulb(s) 0x ff = last dimming level 0 1 0 0 255 from to description 0 99 dim level 255 255 default 4 enable/disable association mode 0 – disabled 1 – enabled 5 devices max: group 1 – 5 devices lifeline group 2 – 5 lighting devices group 3 – 5 lighting devices 0 1 0 0 1 from to description 0 0 disabled 1 1 enabled 6 enable/disable motion sensor 0 – disabled 1 – enabled 0 1 0 0 1 from to description 0 0 disable 1 1 enable texts
- ID Description Value 1
