- Name
- Plug-in Dual Smart Dimmer, With USB Charging
- Brand
- GE
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3132
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.21
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x5044
- Long description
- Transform any home into a smart home with the GE Z-Wave Plug-in Dual Smart Dimmer With 3.4A USB Charging. This module enable wireless control on on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more ! Use the dimming control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. This module also enables you to have independent or simultaneous control of each outlet! Take control of your home lighting with GE Z-Wave Smart Lighting Controls!
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the GE Z-Wave Plug-in Dual Smart Dimmer With 3.4A USB Charging.
- Product identifier
- 28175/ZW3106
- Countries / regions
- United States of America
- Certification number
- ZC10-17045539
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 11
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value updatable by consumer by rf loads controlled value 2 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 99 number of steps or levels 3 led light when shipped from the factory, the led is set to turn on when the connected light is turned on. this is the default setting and can be changed if your primary controller supports the node configuration function. to make the led turn on when the light is turned off, change parameter 3’s value to “0”. to turn the led off at all times, change parameter 3’s value to 2. • parameter no: 3 • length: 1 byte • valid values = 0, 1 or 2 (default 1) 0 1 0 0 1 from to description 2 2 led light always off 0 1 led light on when deivce is off 7 when receiving a z wave dimmer command end point 1 z wave dim command end point 1 number of steps or levels 0 1 0 0 1 from to description 1 99 number of steps or levels 8 when receiving a z wave dimmer command end point 1 timing of the steps 0 1 0 0 3 from to description 1 255 timing of the steps 9 manual control dimming end point 2 number of steps or levels 0 1 0 0 1 from to description 1 99 number of steps or levels 10 manual control dimming end point 2 timing of the steps 0 1 0 0 3 from to description 1 255 timing of the steps texts
- ID Description Value 1