- Name
- Outdoor Strobe Siren
- Brand
- Golden Security
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0F00
- Categories
- Security Add-Ons
- Product id
- 0x0101
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Siren
- Oem version
- HW: 19 FW: 1.32
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0F00
- Z wave version
- 6.71.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x033A
- Product type id
- 0x0003
- Long description
- This product can be included and operated in any Z-Wave™ network with other Z-Wave™ certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. The siren support 110dB alarm sound and light flashing to threaten burglars/intruders.
- Hardware platform
- ZM5202
- Short description
- Z-Wave wireless outdoor usage waterproof siren
- Product identifier
- GS-ZSS08
- Countries / regions
- European Union
- Certification number
- ZC10-18015964
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Siren
- Value 1 switch load capacity current value 1200m a switch load capacity volt ampere value 3.7 v switch load capacity watts value 1.85 outdoor use battery type value 18560 supported notification types value siren association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 1 default alarm sound 2 6 to choose different alarm sound 4 led blink pattern there have 3 led pattern mode for user selecting. 0 1 0 0 3 from to description 1 1 led will not turn on when there is an alarm. 2 2 the led will blink slowly when there is an alarm. 3 3 the led will blink rapidly when there is an alarm. 5 switch binary report disable set this configuration to ‘0’, siren will not send an switch binary report to controller when an alarm is happed. 0 1 0 0 1 from to description 0 0 siren will not send an switch binary report to controller when an alarm is happed. 1 1 siren will send an switch binary report to controller when an alarm is happed. 6 alarm disable this configuration sets siren alarm is enabled or disabled. 0 1 0 0 1 from to description 0 0 alarm disable, siren will never give an alarm. 1 1 alarm enable, siren will give an alarm when an alarm event is happened. 7 sensor report enable this configuration sets binary sensor report is enabled or disabled. 0 1 0 0 0 from to description 0 0 disable sensor binary report when device detects a tampering event. 1 1 enable sensor binary report when device detects a tampering event. 3 alarm duration time this parameter can set the duration of the alarm function after activation. unit of time is: seconds. 0 2 0 0 300 from to description 0 0 alarm silenced (no alarm) 1 32766 duration of the alarm in seconds 32767 32767 the alarm stays on until shut down by the user. texts
- ID Description Value 2
