- Name
- Floodlight Sensor
- Brand
- HomeSeer
- Features
- Feature Values Switch Load Capacity Watts
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0C07
- Categories
- Sensors, All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x000C
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00:00.07
- Library type
- SLAVE_ENHANCED_232
- Product line
- Z-Wave Plus 500 Series
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.82.00
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x000C
- Product type id
- 0x0201
- Long description
- HS-FLS100+ is a Z-Wave enabled outdoor motion sensor that may be used for a variety of applications. • Use as a stand alone outdoor motion sensor and/or LUX sensor. • Use as a replacement sensor for a motion-activated floodlight unit. In this configuration, it can control floodlight loads when motion is sensed or when commands are received from the central controller.
- Hardware platform
- SD3502
- Short description
- HS-FLS100+ is a Z-Wave enabled outdoor motion sensor that's designed to control floodlights when motion is sensed.
- Product identifier
- HS-FLS100-G2
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC10-20096976
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Home Security
- Value 300 firmware updatable value updatable by consumer by rf outdoor use association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 8 720 unit is second 6 sensor load control 0 : floodlight is controlled by lux level and pir trigger 1: lighting control via lux level only, regardless of pir trigger 1 1 0 1 0 from to 0 1 7 temperature sensor offset 0x9 c 0x64 (offset range : 10.0°c ~ +10.0°c) 1 1 0 127 0 from to 0 127 8 pir sensitivity 0/1/2 0: low level, approx. 6m distance 1: mid level, approx. 10m distance 2: high level, approx. 20m distance distance measured at ambient temperature 68°f 1 1 0 2 2 from to 0 2 2 lux settings lux sensor threshold: lux level to activate the pir. when the lux level falls below this threshold and the pir gets triggered, the unit emits a basic set command (value=0x ff) and turns on its floodlight. this overwrites the lux level set by the lux knob. if the level is set to 0, the unit will not turn on its floodlight. the pir will still send a notification report to the controller; if the level is set to 255, when motion is sensed, the sensor ignore the ambient brightness but just turn on the light. 0 2 10 900 50 from to description 10 900 unit is ambient lux level 3 sensor report interval multilevel sensors auto report interval: set the interval of periodic lux level report and temperature report to the controller. 1 2 1 1400 10 from to 1 1400 4 pir alerts enable/disables pir alerts sent from the unit through notification report or basic report commands 1 1 0 1 1 from to 0 1 5 load control floodlight control mode. 1 floodlight is controlled by pir trigger and lux level, or by z wave controller 0 floodlight is controlled by z wave controller directly, regardless of pir trigger or lux level 1 1 0 1 1 from to 0 1 texts