- Name
- ID Lock Z-Wave module
- Brand
- ID Lock
- Features
- Feature Values Battery Quantity
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Categories
- Locks
- Product id
- 0x0001
- Device type
- Door Lock Keypad
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0230
- Product type id
- 0x0003
- Long description
- UART console communication module turns your ID Lock digital doorlock into a Z-Wave Plus enabled digital doorlock. It enables your ID Lock to operate in a Z-Wave network with numerous access control funtions and notifications.
- Hardware platform
- ZM5202
- Short description
- Z-Wave Plus module compatible with ID Lock digital doorlock. www.idlock.no
- Product identifier
- 01A
- Countries / regions
- European Union
- Certification number
- ZC10-16090001
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Value 4x or 8x battery type value aa door lock type value deadbolt motor attachment firmware updatable value updatable by consumer by rf ip (ingress protection) rated outdoor use sensors value air temperature open/closed (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 3 3 away mode and automatic locking mode 0 0 disabled away mode and manual locking mode 2 2 away mode and manual locking mode 1 1 disabled away mode and automatic locking mode 10 retrieve registered user id information configuration get for retriving uid information retrival of registered uids on parameter number 10 to 59 parameter number is representing uid index ex. uid index 1 = parameter 10 uid index 50 = parameter 59 0 4 0 0 0 from to description 10 59 rfid card index number + 9 2 rfid configuration set and report this parameter configures rfid cards to work with the door lock by setting the parameter to specific values. after setting an rfid card to the door lock, the result and configuration can be read. 0 2 0 0 0 from to description 1 1 begin rfid card registration 2 2 rfid registration failed 3 3 successful rfid card registration 2nd byte contains index number 5 5 rfid card registration mode was not started 6 6 rfid card registration mode in progress 4 4 rfid card registration mode finished texts
- ID Description Value 1