- Name
- ID Lock 150 Z-Wave module
- Brand
- ID Lock
- Features
- Feature Values Firmware Updatable
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0300
- Categories
- Locks
- Product id
- 0x0001
- Device type
- Door Lock - Keypad
- Oem version
- HW: 1 FW: 1.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0300
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0373
- Product type id
- 0x0003
- Long description
- A module enabling your ID Lock digital door lock to a Z-Wave Plus enabled digital door Lock. The module is compatible with ID Lock 101 and ID Lock 150. It enables your ID Lock to operate in a Z-Wave network with numerous access control funtions and notifications.
- Hardware platform
- ZM5202
- Short description
- Z-Wave Plus module compatible with ID Lock digital door locks.
- Product identifier
- ID-150
- Countries / regions
- European Union
- Certification number
- ZC10-18066154
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Access Control
- Value updatable by consumer by rf door lock type value deadbolt motor attachment battery quantity value 4x or 8x battery type value aa ip (ingress protection) rated outdoor use sensors value air temperature open/closed (binary) voltage rf signal strength supported notification types value access control color value dark green association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 6 sound volume level 0 to 6 1 door lock and away mode away mode off or on auto or manual lock mode in auto lock mode the door locks three seconds after closing the door. in manual lock mode the door locks when pressing o/c button or activating touchpanel. when away mode is on the inside o/c button is deactivated. 0 1 0 0 1 from to description 0 0 away mode off manual lock mode 1 1 away mode off auto lock mode 2 2 away mode on manual lock mode 3 3 away mode on auto lock mode 3 hinge direction (right or left) direction of hinges on door. to find your correct settings look at the mounted door lock outside. if the door hinges are on the right side of the door correct setting is "right". if the door hinges are on the left side of the door correct setting is "left". 0 1 0 0 0 from to description 0 0 right hinged door 1 1 left hinged door 5 re lock mode re lock mode is factory default on. re lock is the security function relocking the door lock 7 seconds after a valid unlock if the door is not opened. when re lock is off, the door lock will remain unlocked untill a new lock door operation (i.e. pressing o/c button, activating touch panel or closing the door if auto lock mode). 0 1 0 0 1 from to description 0 0 re lock mode off 1 1 re lock mode on 6 service pin mode the service pin on id lock 150 will be enabled or disabled according to this configuration setting. by default the service pin mode is 0=deactivated. it can be set to either 1, 2, 5 or 10 times, 12 hours or 24 hours. this is a set only parameter, if changed locally this config parameter does not change. 0 1 0 0 0 from to description 0 0 service pin deactivated 1 1 service pin valid 1 time 2 2 service pin valid 2 times 3 3 service pin valid 5 times 4 4 service pin valid 10 times 8 8 service pin valid 12 hours 9 9 service pin valid 24 hours 7 door lock model this configuration is only available through the configuration get command. if the configuration report is 65(101), door lock model type is id lock 101. if the configuration report is 96(150), door lock model type is id lock 150. id lock 101 cannot have user pins or individually deleted rfid keyfobs. id lock 101 cannot have service pin mode (mode on id 101 is always on). id lock 101 cannot be remote configured on volume, hinge direction. id lock 101 does not have the re lock function (mod on id 101 is always on). this is a read only parameter, it cannot be changed. 0 1 0 0 96 from to description 65 65 id lock 101 96 96 id lock 150 texts
