- Name
- In-Wall Smart Motion Dimmer
- Brand
- Jasco Products Company
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3033
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.50
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x494D
- Long description
- Transform any home into a smart home with the Jasco In-Wall Smart Motion Dimmer. This Z-Wave device replaces you current light switch using your existing wiring and provides Z-Wave wireless control of overhead lighting. The dimmer enables wireless control of On/Off functions of incandescent, LED, xenon, halogen and fluorescent lighting. Not only does it act as a dimmer but the Jasco In-Wall Smart Motion Dimmer has a built in PIR sensor which can control the local load and be set in occupancy or vacancy mode.
- Hardware platform
- ZM5101
- Short description
- Wirelessly schedule, control and motion activate lights and other devices.
- Product identifier
- 26932
- Countries / regions
- United States of America
- Certification number
- ZC10-16125335
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 17
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Value updatable by consumer by rf neutral wire required sensors value motion/no motion (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 disabled (default) 1 99 brightness level 2 change brightness of associated light bulb(s) 0x ff = last dimming level 0 1 0 0 255 from to description 0 99 brightness levels 255 255 default 6 enable/disable motion sensor 0=disabled 1=enable 0 1 0 0 1 from to description 0 0 disabled 1 1 enable 7 adjust steps/levels with remote adjust steps/levels with remote 0 1 0 0 1 from to description 1 1 default 2 99 steps/levels 8 adjust timing of steps/levels with remote adjust timing of steps/levels with remote 0 2 0 0 3 from to description 1 2 steps/levels 3 3 default 4 255 steps/levels 9 adjust steps/levels adjust steps/levels 0 1 0 0 1 from to description 2 99 steps/levels 1 1 default 10 adjust timing of steps/levels adjust timing of steps/levels 0 2 0 0 3 from to description 4 255 steps/levels 1 2 steps/levels 3 3 default 11 adjust steps/levels with “all on/off” command adjust steps/levels with “all on/off” command 0 1 0 0 1 from to description 1 1 default 2 99 steps/levels 5 invert switch in a 3 way configuration, invert the connected add on switch buttons 0=disabled 1=enable 0 1 0 0 0 from to description 0 0 disabled 1 1 enabled 3 operation mode 1=manual 2=vacancy 3= occupancy 0 1 0 0 3 from to description 1 1 manual 2 2 vacancy 3 3 occupancy texts
- ID Description Value 1
