- Name
- Plug-in Smart Dimmer, Dual Outlet With Pass Through
- Brand
- Jasco Products Company
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3039
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.20
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x5044
- Long description
- Transform any home into a smart home with the Jasco Z-Wave Plug-In Smart Dimmer. The Smart Dimmer enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. The Dimmer provides one Z-Wave enabled outlet for the lamp you would like to control. Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls!
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the Jasco Z-Wave Plug-In Smart Dimmer.
- Product identifier
- 28170/ZW3105
- Countries / regions
- United States of America
- Certification number
- ZC10-17015391
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 7
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 99 number of steps or levels 8 dim rate adjustments (from z wave controller) timing of steps 0 2 0 0 3 from to description 1 255 timing of steps 9 dime rate adjustments (when manually controlled) number of steps or levels 0 1 0 0 1 from to description 1 99 number of steps or levels 10 dim rate adjustments (when manually controlled) timing of steps 0 2 0 0 3 from to description 1 255 timing of steps 11 dim rate adjustments (when receiving all on/off commands) number of steps or levels 0 1 0 0 1 from to description 1 99 number of steps or levels 3 led light when shipped from the factory, the led is set to turn on when the connected light is turned on. this is the default setting and can be changed if your primary controller supports the node configuration function or by a manual method. to make the led turn on when the light is turned on, change parameter 3’s value to “1”. to turn the led off at all times, change parameter 3’s value to 2. 0 1 0 0 0 from to description 0 0 default 1 1 led on when light is turned on 2 2 led always off texts
- ID Description Value 1
