In Wall Smart Dimmer

Loading…

In Wall Smart Dimmer — Philio — Off Screen Space

More specs

Name: In Wall Smart Dimmer
Brand: Philio
Features: Feature Values Firmware Updatable
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0600
Categories: All Lighting Devices, Dimming Lighting Devices
Product id: 0x0051
Device type: Light Dimmer Switch
Oem version: HW: 1 FW: 1.01
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0600
Z wave version: 6.51.09
Frequency plans: JP: 922.50MHz, 923.90MHz, 926.30MHz
Manufacturer id: 0x013C
Product type id: 0x0005
Long description: PAD07 is a security enabled wireless dimmer, based on Z-Wave Plus technology. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z-WaveTM enabled networks. You can On/Off the light by pressing the button briefly, or a long pressing to control the brightness of dimmable light bulb. This dimmer is a transceiver which is a security enabled device which based on Z-Wave Plus technology, and it is fully compatible with any Z-WaveTM enabled network. Since PAD07 supports Security Command Class, it can learn with a Secured enabled controller to fully utilize the device. Its functionality and supported command classes is identical when included as a secure and non-secure device. Adding to Z-WaveTM Network In the front casing, there is an on/off button (also an include button) with LED indicator below which is used to dim on and off or carries out inclusion, exclusion, reset or association. When first power applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion. Auto Inclusion The function of auto inclusion will be executed as long as the dimmer does not have Node ID and just connect the switch to main power. Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once every several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the dimmer.
Hardware platform: SD3502
Short description: PAD07 is a security enabled wireless dimmer, based on Z-Wave Plus technology. You can On/Off the light by pressing the button briefly, or a long pressing to control the brightness of dimmable light bulb.
Product identifier: PAD07
Countries / regions: Japan
Certification number: ZC10-18046090
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Value updatable by consumer by rf switch load capacity current value 0.9 a neutral wire required z wave scene type value scene color value white association groups: Group Number Maximum Nodes Supported End Point ID Description 1
From to description 1 1 1 : show dimmer state 2 2 2 : show night mode 3 3 3 : one flash mode 3 external switch type 1. one switch mode：only s1 can dim up the light bulb to brightest level, then dim down to darkest level, and so on… 2. two switch mode：s1 and s2 can dim up the light bulb to brightest level, then dim down to darkest level, and so on… 3. up/down switch mode：s1 can only dim up the light bulb to brightest level, and s2 can only dim down to off. 0 1 0 0 1 from to description 1 1 1 : one switch mode 2 2 2 : two switch mode 3 3 3: up/down switch mode 4 restore dimmer state whenever the ac power return from lost, pad02 will restore the switch state which could be dimmer off、last dimmer state、dimmer on. the default setting is last dimmer state. 0 1 0 0 1 from to description 0 0 0 : dimmer off 1 1 1 : last dimmer state 2 2 2 : dimmer on 1 dimmer level report mode whenever dimmer on/off state changes, it will send multilevel switch report to the nodes of group1. the default setting is enable the function. 0 1 0 0 1 from to description 0 0 0 : disable 1 1 1 : enable texts: ID Description Value 1

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Lighting

More from Philio