- Name
- Smart Energy Plug
- Brand
- Philio
- Texts
- ID Description Value 8
- Features
- Feature Values Color
- Documents
- Category Description File Manual_English
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- On/Off Switches/Devices
- Product id
- 0x0093
- S2 classes
- S2_AUTHENTICATED, S2_UNAUTHENTICATED
- Device type
- Binary Switch DT
- Oem version
- HW: 01 FW: 01.01
- Library type
- END_NODE_ENHANCED_232
- Product line
- Philio Z-Wave Products
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 7.16.3
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0001
- Long description
- PAN44 is a beautiful, innovative and good performance smart outlet. The built-in power meter can let you monitor the power consumption of your electric appliances. PAN38 is also a well-designed and remotely intelligent device. You can easily know the states of your home appliances like lamp or oven in your kitchen. And no need to worry about if they are not turned off. You can switch the lamp off or turn the oven off when you are in office or even go on a vacation. The PAN44 smart outlet can work as a repeater in Z-Wave™ network. It can extend the Z-Wave™ network range. And no need to do any configuration, just plug it in the socket.
- Hardware platform
- ZGM130S037HGN2 / ZGM130S037HGN1
- Short description
- PAN44 is a Smart Energy Plug. The built-in power meter can let you monitor the power consumption of your electric appliances. The product supports an Over the Air (OTA) feature for the products firmware upgrade.
- Product identifier
- PAN44_US
- Countries / regions
- Argentina, Bahamas, Barbados, Bermuda, Bolivia, British Virgin Islands, Canada, Cayman Islands, Colombia, Ecuador, Guatemala, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Saint Kitts and Nevis, Suriname, Trinidad and Tobago, Turks and Caicos Islands, United States of America
- Supports smart start
- Yes
- Certification number
- ZC14-22030078
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Supported notification types
- Notification Type Event / State Power Management
- Supported / controlled meter types
- Meter Type Rate Type Electric meter
- Value white firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile 1
