- Name
- 2 Wire Dimmer
- Brand
- Philio
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x007e
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Multilevel Switch
- Oem version
- HW: 1 FW: 1.01
- Library type
- SLAVE_ENHANCED_232
- Product line
- Philio Z-wave Products
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 7.13.5
- Frequency plans
- IN: 865.20MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0005
- Long description
- The device should only need two wires for dimming, easy to install. This device is a security enabled Z-Wave Plus™ product that uses encrypted Z-Wave Plus™ messages to communicate to other security enabled Z-Wave Plus™ products. Z-Wave™ enabled devices displaying the Z-Wave™ logo can also be used with this device regardless of the manufacturer, and this device can also be used in other manufacturer’s Z-Wave™ enabled networks.
- Hardware platform
- ZGM130
- Short description
- PAD15 is a 2 Wire dimmer. It only needs to connect two wires, single wire (L) and load (NO1).
- Product identifier
- PAD15-IN
- Countries / regions
- India
- Supports smart start
- Yes
- Certification number
- ZC12-21070255
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported notification types
- Notification Type Event / State Power Management
- Value white firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- From to description 0 0 0: report off 1 1 1: report on 1 switch set to select connected switch function. setting value: 0: only s1 is effective 1: both s1 and s2 are effective. 2: s1 dimmer up s2 dimmer down 1 1 0 2 1 from to description 2 2 2: s1 dimmer up s2 dimmer down 1 1 1: both s1 and s2 are e ective. 0 0 0: only s1 is e ective 2 power on recovery status set to set dimmer level when ac power on. setting value: 0: off 0% 1: on last level 2: on 100% 1 1 0 2 0 from to description 0 0 0: off 0% 1 1 1: on last level 2 2 2: on 100% 4 maximum level to set dimming level maximum value. dimming level will not over the setting value. setting value: cannot be lower than the minimum level 1 1 1 99 99 from to description 1 99 1~99 : 1% ~ 99% 5 minimum level to set dimming level minimum value. dimming level will directly go to 0% when dimming value is lower than the setting value. setting value: cannot be higher than the maximum level 1 1 0 98 0 from to description 0 98 0~98 : 0% ~ 98% 6 basic duration set unit: second to set dimming finished duration time when physical switch used. ex: when setting is 2, it will take 2 seconds from switch on action to dimming finished. 1 1 0 127 2 from to description 0 127 unit: second ,0 ~127second texts
- ID Description Value 8
