- Name
- Flood Multisensor
- Brand
- Philio
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- Categories
- Sensors
- Product id
- 0x001F
- Device type
- Notification Sensor
- Oem version
- 01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0002
- Long description
- The flood multisensor PAT02 has flood, temperature and humidity, 3 sensors function in one, based on Z-Wave™ technology. Using Z-Wave™ plus technology, it supports security and Over-The-Air updating.
- Hardware platform
- SD3502
- Short description
- The flood multisensor PAT02 has flood, temperature and humidity, 3 sensors function in one, based on Z-Wave™ technology.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- Product identifier
- PAT02-1A
- Countries / regions
- European Union
- Certification number
- ZC10-15040009
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- From to description 0 255 setting the basic command value 0x00. 2 basic set on level setting the basic command value. when the flood trigger on(0x ff), send the basic cc to the group 2. 0 1 0 0 255 from to description 0 255 setting the basic command value 0x ff. 6 mult sensor function switch multisensor function switch. using bit to control. 0 1 0 0 0 from to description 64 64 disable the humidity report after event triggered. (1:disable, 0:enable) 23 humidity differential report the humidity differential to report. 0 means turn off this function. the unit is percentage. enable this function the device will detect every 10 seconds. 0 1 0 0 5 from to description 0 60 the humidity differential to report. texts
- ID Description Value 1
