- Name
- Recessed Door Sensor
- Brand
- Philio
- Texts
- ID Description Value 1
- Features
- Feature Values Sensors
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C06
- Categories
- Sensors
- Product id
- 0x006A
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 255 FW: 0.10
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C06
- Z wave version
- 6.81.04
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0002
- Long description
- PSM09 is only for indoor using device. PSM09 can detect the the door is open or not. The Recessed door sensor PSM09 is Base on Z-WaveTM technology. It is the Z-WaveTM plus product, it support the security, OTA. Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless communication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments. The technology uses a low-power RF radio embedded or retrofitted into home electronics devices and systems, such as lighting, home access control, entertainment systems and household appliances. Notice: if user use some command, it have to check device is security bootstrap otherwise some command cannot increment. This device is a security enabled Z-Wave Plus product that is able to use encrypted Z-Wave Plus messages to communicate to other security enabled Z-Wave Plus products. This device must be used in conjunction with a Security Enabled Z-Wave Controller in order to fully utilize all implemented functions. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
- Hardware platform
- SD3502
- Short description
- PSM09 is only for indoor using device. PSM09 can detect the the door is open or not. Those newest features of the Z-WaveTM technology. Z-WaveTM is a wireless ommunication protocol designed for home automation, specifically to remotely control applications in residential and light commercial environments.
- Product identifier
- PSM09-A
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-19066570
- Radio range z wave (m)
- 40
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_NOTIFICATION_V8
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Access Control
- Value open/closed (binary) firmware updatable value updatable by consumer by rf supported notification types value access control home security battery quantity value 1 battery type value er14250 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1