- Name
- Single Function PIR Sensor
- Brand
- Philio
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0050
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.27:01.21
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.09
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0002
- Long description
- The PIR sensor PSP05 has PIR sensor function,based on Z-Wave™ technology.
- Hardware platform
- SD3502
- Short description
- The PIR sensor PSP05 has PIR sensor function.
- Product identifier
- PSP05
- Countries / regions
- European Union
- Certification number
- ZC10-16105258
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Value white battery quantity value 1 battery type value cr123 a sensors value motion/no motion (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 128 127 basic command value to turn on the light. 3 pir sensitivity pir sensitivity setting. 0 means disable the pir motion. 1 means the lowest sensitivity. 99 means the highest sensitivity. high sensitivity means can detected long distance,but if there is more noise signal in the environment, it will re trigger too frequency. 0 1 0 0 80 from to description 0 99 pir sensitivity setting. 8 pir re detect interval time in the normal mode, after the pir motion detected, setting the re detect time. 8 seconds per tick,default tick is 3(24 seconds). setting the suitable value to prevent received the trigger signal too frequently. also can save the battery energy. 0 1 0 0 3 from to description 1 127 re detect time 9 turn off light time after turn on the light,setting the delay time to turn off the lighting when the pir motion to turn off the lighting when the pir motion is not detected.8 seconds per tick,default tick is 4(32 seconds). 0 means never send turn off light command. 0 1 0 0 4 from to description 0 127 delay time to turn off the lighting when the pir motion is not detected. texts
- ID Description Value 5
