- Name
- Slim Multisensor
- Brand
- Philio
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0059
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.29:01.22
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.09
- Frequency plans
- ANZ: 919.80MHz, 921.40MHz
- Manufacturer id
- 0x013C
- Product type id
- 0x0002
- Long description
- The slim multisensor PST02 has PIR, door/window, temperature and illumination, 4 sensors function in one,based on Z-Wave technology.
- Hardware platform
- SD3502
- Short description
- Slim Multisensor 4 in 1 (PIR, Door/Window, Temperature and Illumination)
- Product identifier
- PST02-A-BR
- Countries / regions
- Brazil
- Certification number
- ZC10-17105797
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 8
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V5
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Home Security
- Value 1 supported notification types value home security battery type value cr123 a color value white sensors value air temperature association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 127 default tick is 3 (24 seconds). 9 turn off light time after turn on the lighting, setting the delay time to turn off the lighting when the pir motion is not detected. 8 seconds per tick, default tick is 4 (32seconds).0 means never send turn off light command. 0 1 0 0 4 from to description 0 127 default tick is 4 (32seconds). 3 pir sensitivity pir sensitivity settings.0 means disable the pir motion.1 means the lowest sensitivity,99 means the highest sensitivity.high sensitivity means can detected long distance, but if there is more noise signal in the environment, it will re trigger too frequency. 0 1 0 0 80 from to description 0 99 pir sensitivity settings 1 1 the lowest sensitivity 99 99 the highest sensitivity 0 0 disable the pir motion 2 basic set level setting the basic command value to turn on the light. the 0x ff( 1) means turn on the light. for dimmer equipment 1 to 100 means the light strength.0 means turn off the light.caution: the value is unsigned byte, the range is from 0x00 ~ 0x ff. 0 1 0 0 127 from to description 0 0 turn off the light 0 127 equipment 1 to 100 means the light strength. 0 means turn off the light 4 light threshold setting the illumination threshold to turn on the light. when the event triggered and the environment illumination lower then the threshold, the device will turn on the light.0 means turn off illumination detected function. and never turn on the light.1 means darkest.99 means brightest.100 means turn off illumination detected function. and always turn on the light notice: in none test mode, only the value in 1 to 99 will enable the illumination detected function and update the illumination value. 0 1 0 0 99 from to description 0 100 setting the illumination threshold to turn on the light 1 1 1 means darkest 99 99 99 means brightest 100 100 100 means turn off illumination texts
