- Name
- Z-Wave Keypad
- Brand
- Popp
- Features
- Feature Values Z-Wave Scene Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_CONTROLLER_PORTABLE_REPORTING
- User icon
- 0x0300
- Categories
- Locks
- Product id
- 0x0002
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.06
- Library type
- CONTROLLER_PORTABLE
- Supports nwi
- Yes
- Installer icon
- 0x0300
- Z wave version
- 6.51.10
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0154
- Product type id
- 0x0005
- Long description
- This keypad is a security enabled Z-Wave Plus product. An security enabled Z-Wave controller must be used to fully utilize this product. The keypad allows securely controlling devices - such as door locks - and trigger actions in a gateway – such as arm/disarm alarm system– based on the entry of certain key codes. Additionally a bell key allows emulating a doorbell by operating e.g. a chimney or a light or both. The device can operate in two different modes. The mode is chosen the way the device is included into a Z-Wave network: (a) Stand Alone Mode. In this case the keypad acts as the primary network controller and will include other devices such as e.g. a strike lock control or a chimney. No other central controller is needed. The management of user codes is done using the keypad itself. (b) Network Mode. The keypad is included as additional device into an exiting network. In Z-Wave terms it will then act as secondary controller. It will send commands to a central controller and is managed by this controller. In this mode the device can still directly control door locks but it can also be used to trigger scenes in a central controller. The device is protected by a tamper switch sending out an alarm message when the enclosure is opened.
- Hardware platform
- ZM5101
- Short description
- 12 button numerical keypad with extra ring button, can work as primary or as secondary controller
- Product identifier
- 700045
- Countries / regions
- European Union
- Certification number
- ZC10-17085733
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_DOOR_LOCK
- Supported notification types
- Notification Type Event / State Access Control
- Value central scene battery quantity value 4 battery type value aaa color value antique brass outdoor use supported notification types value access control association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 99 basic set command value 255 255 basic set command value 5 central scene id for user codes this parameter defines if different user codes shall cause individual or similar scene id sent to the main controller. 0 1 0 0 0 from to description 0 0 constant scene id 20 for all user codes 1 1 individual user codes 1 ... 20 6 buzzer confirmation this parameter defines if the internal buzzer shall be used to confirm button presses. 0 1 0 0 0 from to description 0 0 disabled 1 1 enabled 1 door lock automatic secure timeout after this time a close command is sent to the controlled door lock. on default no close command is sent assuming that the strike lock has its own timeout set 0 1 0 0 0 from to description 0 127 seconds 2 ring button press basic command off timeout after this time the door bell will receive an of command regardless of the actuall button is pressed or not 0 1 0 0 3 from to description 0 127 seconds 3 ring button on command this value is sent into association group 3 when the door bell button is pressed. 0 1 0 0 255 from to description 0 99 basic set command value 255 255 basic set command value texts
- ID Description Value 4