- Name
- Z-Wave Rain Sensor
- Brand
- Popp
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0d0c
- Categories
- Sensors
- Product id
- 0x0011
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.02
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0d00
- Z wave version
- 6.51.09
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0154
- Product type id
- 0x0004
- Long description
- This device measures the rain level on a certain position. The device is IP55 rated and can be used outside the home in the garden or on any other place exposed to rain. The device has a funnel on the top-side that will collect the rain on a certain diameter. The internal mechanics and electronics counts the rain level and will report it every about 4 minutes if and only if there is rain. The device also monitors a heavy rain condition (10 l/sqm within 5 minutes) and will send out alarm messages when detected.
- Hardware platform
- ZM5202
- Short description
- This device measures the rain level on a certain position. The device is IP55 rated and can be used outside the home in the garden or on any other place exposed to rain.
- Product identifier
- 700168
- Countries / regions
- European Union
- Certification number
- ZC10-17065642
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 6
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Rain rate
- Supported / controlled meter types
- Meter Type Rate Type Description Water meter
- Value not updatable sensors value rain rate supported meter type value water color value dark gray battery type value aaa battery quantity value 2 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 99 set command 2 rain start command this basic set command value is sent out into association group 2 when the device detects start of rain. 0 1 0 0 99 from to description 0 99 set command 1 rain counter this values shows the total count of rain from the moment of inclusion in mm water level. by writing this value this counter can be reset. 0 2 0 0 0 from to description 0 32000 mm 3 rain stop command this basic set command value is sent out into association group 2 when the device detects stop of rain. 0 1 0 0 0 from to description 0 99 set command 4 meter multiplier this multiplier allows to adapt the display to certain controllers not being able to handle very low numbers. 0 2 0 0 1 from to description 1 1 1 10 10 10 100 100 100 1000 1000 1000 5 heavy rain this threshold defines when a heavy rain condition is hit. in most countries this is defined as > 15 mm rain per hour. the default value however is to turn this function off. 0 1 0 0 255 from to description 0 255 mm 7 heavy rain stop command this basic set command value is sent out into association group 3 when the device detects stop of heavy rain. 0 1 0 0 0 from to description 0 99 set command texts
- ID Description Value 5
