- Name
- Siterwell Motion Sensor
- Brand
- Siterwell Technology
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0300
- Device type
- Notification Sensor
- Oem version
- HW: 66 FW: 3.80
- Library type
- SLAVE_ROUTING
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0266
- Product type id
- 0x0003
- Long description
- This product can be included and operated in any Z‐Wave network with other Z‐Wave certified devices from other manufacturers and/or other applications. All non‐battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. In the Back casing, there is a button that is used to carry out include, exclude, wake up device or reset factory default settings. When power is first supplied, the LED will flash on and off alternately at one second intervals within 5 seconds if the detector has not been added a Z‐Wave network. Please get familiar with the terms below before starting the operations.
- Hardware platform
- ZM5202
- Short description
- This product can be included and operated in any Z‐Wave network with other Z‐Wave certified devices from other manufacturers and/or other applications. All non‐battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
- Product identifier
- STW-W3300WU
- Countries / regions
- European Union
- Certification number
- ZC10-17085750
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Illuminance
- Supported notification types
- Notification Type Event / State Home Security
- Value 1 firmware updatable value updatable by manufacturer z wave scene type value scene battery type value cr123 a color value white communications connections value rs 232 (serial) communications protocol value z wave serial api sensors value luminance supported notification types value home security association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 0 0 0, 1 ~ 99 or 255 0 – off, alarm cancelling or turning a device off 1 ~ 99 or 255 – on (binary switch device) dim level (multilevel switch device) 4 enabled/disabled pir function this parameter can be enabled or disabled the pir detector detecting function. 0 1 0 0 255 from to description 255 255 – enable pir detector function. unsigned 0 0 – disable pir detector function. unsigned 5 lux level set this parameter can be set a lux level value which determines when the light sensor is activated. if the ambient illumination level falls below this value and a person moves across or within the detected area , pir detector will send a z‐wave on command(i.e. basic set (value = parameter 3) to an associated device and activate it. 0 2 0 0 100 from to description 0 1000 lux .unsigned 6 re‐trigger interval setting. this parameter can be used to adjust the interval of being re‐triggered after the pir detector has been triggered. this parameter value must be less than parameter 2#. if user set this parameter to default by configure cc, the parameter #2 will be set to default value. 0 1 0 0 8 from to description 1 8 second .unsigned 7 light sensor polling interval this parameter can be set the light sensor measure ambient illumination level interval time. note: this value must be less than wakeup interval time. 0 2 0 0 180 from to description 60 36000 second .unsigned 9 lux level report this parameter defines by how much lux level must change, in lux, to be reported to the main controller. 0 2 0 0 100 from to description 0 255 lux. unsigned 10 led blink enable this parameter defines the led on/off enable. if this parameter is set to ‘1’, the led blink will be enabled, the led will blink once when motion sensor detect a movement. otherwise, the led will be turned off always. 0 1 0 0 1 from to description 0 1 unsigned 8 lux level enable if this parameter is set to ‘1’, and when lux level less than the value define by parameter #5, pir detector will send a basic set command frame(i.e. basic set (value = parameter 3) to an associated device and activate it. if lux level greater than the value define by parameter #5, pir detector will not send a basic set command frame. 0 1 0 0 0 from to description 0 1 unsigned texts