Skip to main content

Loading…

IS 140-2 Z-Wave — Steinel GmbH — Off Screen Space

Off Screen Space

IS 140-2 Z-Wave

Steinel GmbH · Sensor

IS 140-2 Z-Wave

View all Steinel GmbH products

Connectivity: Z-WaveCategory: Sensor

Z-WaveCertified

Are you toying with the idea of fitting a motion detector to your building? The infrared controlled IS 140-2 motion detector gives you all the benefits of a modern detector. Needless to say, we always use the very latest technology for our bestsellers too. For instance, we have given the product in its current generation even more class: larger adjustment angle, even longer reach and even better detection performance. Treat your home to intelligent sensor technology. Smart home included. The optional Smart Friends box and the free Smart Friends app make it easy to set the motion detector via smart phone or tablet. The light connected can also be switched ON or OFF via app. Other Steinel products can also be interconnected. If you wish, this also works via remote control when you are out. That completes your own light management system. Along with STEINEL products, Smart Friends solutions from PAULMANN, SCHELLENBERG and ABUS can also integrated. Smart homes from a brand-name provider.

Want to buy adds it to your wish list and follows Steinel GmbH for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 1.00:01.00

Specifications

Overview

Company: Steinel GmbH
Category: Sensor
Device type: Notification Sensor

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.09
Z-Wave frequency: EU: 869.85MHz, 868.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: IS 140-2 Z-Wave
Brand: Steinel GmbH
Features: Feature Values IP (Ingress Protection) Rated
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0C07
Categories: Sensors
Product id: 0x1A72
Device type: Notification Sensor
Oem version: HW: 1 FW: 1.00:01.00
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0C07
Z wave version: 6.51.09
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x0271
Product type id: 0x0002
Long description: Are you toying with the idea of fitting a motion detector to your building? The infrared controlled IS 140-2 motion detector gives you all the benefits of a modern detector. Needless to say, we always use the very latest technology for our bestsellers too. For instance, we have given the product in its current generation even more class: larger adjustment angle, even longer reach and even better detection performance. Treat your home to intelligent sensor technology. Smart home included. The optional Smart Friends box and the free Smart Friends app make it easy to set the motion detector via smart phone or tablet. The light connected can also be switched ON or OFF via app. Other Steinel products can also be interconnected. If you wish, this also works via remote control when you are out. That completes your own light management system. Along with STEINEL products, Smart Friends solutions from PAULMANN, SCHELLENBERG and ABUS can also integrated. Smart homes from a brand-name provider.
Hardware platform: ZM5202
Short description: Infrared motion detector IS 140-2 Z-Wave, can be integrated into the Smart Friends system or any other Z-Wave network, for indoors and out, ideal for targeted detection close to the building, 140° angle of coverage, reach up to 14 m, selectable time and twilight threshold, sensor turns through 90° and tilts through 180°.
Product identifier: 40111677001
Countries / regions: European Union
Certification number: ZC10-17045540
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_NODE_NAMING
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type General purpose
Supported notification types: Notification Type Event / State Home Security
Value updatable by consumer by rf outdoor use neutral wire required sensors value motion/no motion (binary) luminance switch load capacity volt ampere value 500 switch load capacity watts value 1000 supported notification types value home security system electric load type association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 2 100 % 8 global light use external ambient light value when global light mode is on – device overrides its own light sensor values and uses light report values from any z wave light sensor instead – this has to be configured appropriately to send light automatically. if the last remote light level value is older than 30 minutes, the internal light value is used again until the next external value is received. 0 1 0 0 1 from to description 0 0 off function 1 1 on function 10 off behaviour behaviour after basic off ( and similar commands ). if a transition ( even with zero change ) with a non default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1 209 lamp is switched off and remains so until after a specified timeout once a new motion event (local or remote) is received. 0 2 0 0 10 from to description 1 100 timeout: 1 second (1) to 100 seconds (100) in 1 second resolution 101 200 timeout: 1 minute (101) to 100 minutes (200) 1 minute resolution 201 209 timeout: 1 hour (201) to 9 hours (209) in 1 hour resolution 255 255 lamp is switched off for time (cfg 1). it does not wait for a motion event and works normally via current motion evaluation 0 0 lamp is switched off and remains so until any new motion event (local or remote) is received. 11 on behaviour behaviour after basic on (and similar commands). if a transition (even with zero change) with a non default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1 209 lamp is switched on and remains so until after a specified timeout once a new motion event (local or remote) is received. it then works normally via current motion evaluation. 0 2 0 0 255 from to description 1 100 timeout: 1 second (1) to 100 seconds (100) in 1 second resolution 101 200 timeout: 1 minute (101) to 100 minutes (200) 1 minute resolution 201 209 timeout: 1 hour (201) to 9 hours (209) in 1 hour resolution 255 255 lamp is switched on for time (cfg 1). it does not wait for a motion event and works normally via current motion evaluation. 0 0 lamp is switched on and remains so until any new motion event (local or remote) is received. it then works normally via current motion evaluation. notice – during the day, this mode cannot be ended remotely due to motion events not being transmitted – only via local motion sensor if enabled. 1 time duration of light after motion detection. 0 2 0 0 180 from to description 5 900 seconds 2 light light threshold [ lx ] value can be controlled via potentiometer – potentiometer value is used as the default value and any potentiometer movement rewrites the current setting. 0 2 0 0 2000 from to description 0 0 run learn ambient light sequence (the level is set automatically) 2 1999 lux 2000 2000 2000 is used as daylight ( always night mode) 9 slave mode can disable sensor controll “stupid” mode (bit 2 = 1): has higher priority then slave mode. lamp is permanently on (usefull for simple power wall switch controlling). slave mode ( bit 0 = 1 ): only if included in z wave network usefull for controlling via third party sensor relay is directly controlled via z wave, internal sensors are not used for controlling it. central unit checking ( bit 1 = 1 ): ( usefull especialy for controlling via gateway ) when slave bit is 0: lamp signalises fail of lifeline connection ( if this bit is zero fail of lifeline connection is not signalised ) when slave bit is 1: device checks presence of z wave device in lifeline group ( gateway ). if it is not present for 2 minutes ( testing repeatedly every 30 seconds ) device switches to normal mode in the same way as after the end of local disabled mode ( on behaviour ) the device checks every 1 minute for recovery of lifeline connection. if no lifeline specified it works in normal mode be careful with this option, lamp stops using it’s own motion sensor in slave and stupid mode. 0 1 0 0 2 from to description 0 0 normal mode 1 1 slave mode without gateway checking 2 2 normal mode with lifeline error signalisation 3 3 slave mode with gateway checking 4 4 stupid mode lamp permanetly on texts