XLED home 2 Z-Wave

Loading…

XLED home 2 Z-Wave — Steinel GmbH — Off Screen Space

More specs

Name: XLED home 2 Z-Wave
Brand: Steinel GmbH
Features: Feature Values Firmware Updatable
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0700
Categories: All Lighting Devices, On/Off Switches/Devices
Product id: 0x1A73
Device type: On/Off Power Switch
Oem version: HW: 7 FW: 1.00:01.00
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0700
Z wave version: 6.51.09
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x0271
Product type id: 0x0001
Long description: The moveable sensor-switched outdoor floodlight with fully swivelling LED panel in a classy opal look. The XLED home 2 sensor-switched floodlight comes in a sophisticated design. It is not just an eye-catcher, but also a truly talented mover. Thanks to the fully swiveling LED panel, every corner of the entrance area can be illuminated flexibly and as required. The highly efficient LED technology coupled with the opal cover provides maximum lighting comfort. As an individual floodlight or interconnected with the slave version, the innovative new generation of the XLED home success series is available in white, black, graphite and silver. Smart home included. The optional Smart Friends Box and the free Smart Friends app make it easy to set the XLED home 2 Z-Wave via smart phone or tablet. The floodlight can also be switched ON or OFF via app. Other Steinel products can also be interconnected. If you wish, this also works via remote control when you are out. That completes your own light management system. Along with STEINEL products, Smart Friends solutions from PAULMANN, SCHELLENBERG and ABUS can also integrated. Smart homes from a brand-name provider.
Hardware platform: ZM5202
Short description: Sensor-switched outdoor floodlight, can be integrated into the Smart Friends system or any other Z-Wave network, for even more safety and security. Fully swivelling LED panel, 1184 lm at a power consumption of only 14.8 W. Swivelling precision IR sensor. 140° angle of coverage, 14 m reach. High thermal conductivity magnesium composite cooling system (HCMC).
Product identifier: 50111677101
Countries / regions: European Union
Certification number: ZC10-17045541
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type General purpose
Supported notification types: Notification Type Event / State Home Security
Value updatable by consumer by rf z wave scene type value scene electric load type value led switch load capacity current value 0,077 switch load capacity volt ampere value 22,1 switch load capacity watts value 14,8 neutral wire required outdoor use sensors value motion/no motion (binary) luminance ip (ingress protection) rated supported notification types value home security system association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 5 900 seconds 6 brightnes meas interval brightness measuring interval [ minutes ] interval for ambient light measuring when lamp is on ( lamp switches off shortly and measures ). 0=function is off 0 1 0 0 0 from to description 0 0 function is off 5 120 minutes 8 global light use external ambient light value when global light mode is on – device overrides its own light sensor values and uses light report values from any z wave light sensor instead – this has to be configured appropriately to send light automatically. if the last remote light level value is older than 30 minutes, the internal light value is used again until the next external value is received. 0 1 0 0 1 from to description 1 1 on function 0 0 off function 10 off behaviour behaviour after basic off ( and similar commands ). if a transition ( even with zero change ) with a non default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1 209 lamp is switched off and remains so until after a specified timeout once a new motion event (local or remote) is received. 0 2 0 0 10 from to description 0 0 lamp is switched off and remains so until any new motion event (local or remote) is received. 1 100 timeout: 1 second (1) to 100 seconds (100) in 1 second resolution 101 200 timeout: 1 minute (101) to 100 minutes (200) 1 minute resolution 201 209 timeout: 1 hour (201) to 9 hours (209) in 1 hour resolution 255 255 lamp is switched off for time (cfg 1). it does not wait for a motion event and works normally via current motion evaluation 11 on behaviour behaviour after basic on (and similar commands). if a transition (even with zero change) with a non default duration is to be processed, the transition cannot be interrupted by any motion event in any case. for values 1 209 lamp is switched on and remains so until after a specified timeout once a new motion event (local or remote) is received. it then works normally via current motion evaluation. 0 2 0 0 255 from to description 0 0 lamp is switched on and remains so until any new motion event (local or remote) is received. it then works normally via current motion evaluation. notice – during the day, this mode cannot be ended remotely due to motion events not being transmitted – only via local motion sensor if enabled. 1 100 timeout: 1 second (1) to 100 seconds (100) in 1 second resolution 101 200 timeout: 1 minute (101) to 100 minutes (200) 1 minute resolution 201 209 timeout: 1 hour (201) to 9 hours (209) in 1 hour resolution 255 255 lamp is switched on for time (cfg 1). it does not wait for a motion event and works normally via current motion evaluation. 2 light light threshold [ lx ] value can be controlled via potentiometer – potentiometer value is used as the default value and any potentiometer movement rewrites the current setting. 0 2 0 0 2000 from to description 2000 2000 2000 is used as daylight ( always night mode) 0 0 run learn ambient light sequence (the level is set automatically) 2 1999 lux 5 sensitivity motion sensor (radar) sensitivity [%] value can be controlled via potentiometer – potentiometer value is used as the default value and any potentiometer movement rewrites the current setting 0 1 0 0 100 from to description 2 100 % 9 slave mode can disable sensor controll “stupid” mode (bit 2 = 1): has higher priority then slave mode. lamp is permanently on (usefull for simple power wall switch controlling). slave mode ( bit 0 = 1 ): only if included in z wave network usefull for controlling via third party sensor lamp is directly controlled via z wave, internal sensors are not used for controlling it. central unit checking ( bit 1 = 1 ): ( usefull especialy for controlling via gateway ) when slave bit is 0: lamp signalises fail of lifeline connection ( if this bit is zero fail of lifeline connection is not signalised ) when slave bit is 1: lamp checks presence of z wave device in lifeline group ( gateway ). if it is not present for 2 minutes ( testing repeatedly every 30 seconds ) device switches to normal mode in the same way as after the end of local disabled mode ( on behaviour ) the device checks every 1 minute for recovery of lifeline connection. if no lifeline specified it works in normal mode be careful with this option, lamp stops using it’s own motion sensor in slave and stupid mode. 0 1 0 0 2 from to description 0 0 normal mode 1 1 slave mode without gateway checking 2 2 normal mode with lifeline error signalisation 3 3 slave mode with gateway checking 4 4 stupid mode lamp permanetly on texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Plug Switch

More from Steinel GmbH