Multireg Z-Wave

Loading…

Multireg Z-Wave — Thermo-Floor AS — Off Screen Space

More specs

Name: Multireg Z-Wave
Brand: Thermo-Floor AS
Texts: ID Description Value 1
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
Categories: Thermostats
Product id: 0x0001
Device type: Thermostat - HVAC
Oem version: 01
Library type: SLAVE_ROUTING
Supports nwi: Yes
Z wave version: 6.51.00
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x019B
Product type id: 0x0001
Long description: Heatit Z-Wave is an electronic thermostat for mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Fibaro, Sensio, Vera, Zipato and others. The display will show the actual room temperature. By pressing the buttons, the display will show the set value. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V. If the load is greater than this, the thermostat needs to be connected to a contactor. It can be used with two external temperature sensors. Functions: • Room sensor • Floor sensor • Temperature limiter • Power regulator • Z-Wave chip 500 series • Week program/setback temperature via gateway • Setback mode • 7-segment white LCD-screen • Can be used in connection with different NTC-sensors • Lock mode/child lock • Backlight • Calibration • 8 scenarios CONNECTION CLAMPS Use 1,5 mm² or 2,5 mm² cables according to power need. TECHNICAL DATA Rated voltage: 230 V 50/60 Hz Max. load: 3600W Max. current: 16A Power consumption: 1,5W Protection class: IP21 Min/Max installation temp: -20°C to 40°C Min/Max operating temp: 5°C to 40°C Temperature intervals: Floor sensor 5°C to 40°C Room sensor 5°C to 40°C Hysteresis: 0,5°C Sensor values: 0°C 29,1 kOhm 10°C 18,6 kOhm 15°C 15,1 kOhm 20°C 12,2 kOhm 25°C 10,0 kOhm Breaker: Single-pole
Hardware platform: ZM5202
Short description: Heatit Z-Wave is an electronic thermostat for mounting in a standard wall box. The thermostat has a built-in Z-Wave chip that can be connected to Home Automation systems like Fibaro, Sensio, Vera, Zipato and others. Heatit Z-Wave is equipped with a single-pole switch. The thermostat can handle loads up to 16A/3600W at 230V.
Association groups: Group Number Maximum Nodes Supported End Point ID Description 1
Product identifier: TF016
Countries / regions: European Union
Certification number: ZC10-15010002
Radio range z wave (m): 40
Supports explorer frames: Yes
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Thermostat