- Name
- Z-Wave to Systemair HVAC Adapter
- Brand
- Villavent
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1200
- Categories
- Thermostats, HVAC
- Product id
- 0x0001
- Device type
- Thermostat - HVAC
- Oem version
- HW: 2 FW: 0.01:00.80:36.80:16.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1200
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0276
- Product type id
- 0x0139
- Long description
- Z-Wave to Systemair HVAC Adapter is an Z-Wave Interface adapter, which connects the Z-Wave network with the Systemair Heat Recovery Ventilation. The Systemair HVAC is a residential HRV system, which can be controlled locally by one or more UI, as well as remotely by a mobile App or a browser via Z-Wave network.
- Hardware platform
- ZM5202
- Short description
- Z-Wave to Systemair HVAC Adapter is an Z-Wave Interface adapter, which connects the Z-Wave network with the Systemair Heat, Ventilation and Air Condition Unit.
- Product identifier
- 29990
- Countries / regions
- European Union
- Certification number
- ZC10-16065101
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Value updatable by consumer by rf thermostat hvac systems supported value humidity control ventilation control thermostat modes value auto changeover away thermostat power source value mains powered (120 v/240 v) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 500 the counter stops on 500 4 boost mode remaining time read only parameter, shows how many seconds are left for boost mode. 0 2 0 0 0 from to description 240 0 counts down while boost mode is active 5 temperature setpoint step read only parameter, shows the min change available in degrees celsius x 10. example 25 = 2.5 degree celsius. 0 2 0 0 10 from to description 10 10 /10 = 1.0 degrees celsius step 25 25 /10 = 2.5 degrees celsius setp 6 cdx new firmware version available shows the firmware version available in the z wave adapter for the firmware target 2. this parameter must be written after successful uploading of the firmware image for the local ui. example ui version 5.02.03: msb x, don't care, next 05, next 02, lsb 03. 0 4 0 0 0 from to description 0 16777215 max version 255.255.255 7 pcu ecx new firmware version available shows the firmware version available in the z wave adapter for the firmware target 1. this parameter must be written after successful uploading of the firmware image for the ventilation unit. example ventilation unit version 6.07.08: msb x, don't care, next 06, next 07, lsb 08. 0 4 0 0 0 from to description 0 16777215 max version 255.255.255 texts
- ID Description Value 1
