- Name
- 4in1 PIR Sensor
- Brand
- Vision
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x2101
- Device type
- Notification Sensor
- Oem version
- HW: 5 FW: 5.01:10.01
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- JP: 922.50MHz, 923.90MHz, 926.30MHz
- Manufacturer id
- 0x0109
- Product type id
- 0x2021
- Long description
- * Includes Motion, Temperature, Humidity, and Light sensor * 360 degree detection (suitable for ceiling fixture) * Compact Size: 59*59*41mm * 2*AAA Battery * Low Battery Detection * LED Status Indicator * 100feet line of sight
- Hardware platform
- ZM5202
- Short description
- This sensor monitors movement, and send Z-Wave TM signal when movement is detected inside the building. With Temperature, Humidity & Light sensor built inside, it will send the signal out when temperature, humidity & Lightness changed.
- Product identifier
- ZP3111JP-5
- Countries / regions
- Japan
- Certification number
- ZC10-17075680
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Access Control
- Value access control battery type value aaa color value white communications protocol value z wave z/ip firmware updatable value updatable by consumer by rf sensors value motion/no motion (binary) battery quantity value 2 association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 1 choose °f 2 auto temperature report interval 1~50 (set up from 0.1°c~5°c) 0 1 0 0 10 from to description 1 50 auto temperature interval from 0.1°c~5°c 3 auto humidity report interval 1~50 (set up from 1%~50%) 0 1 0 0 10 from to description 1 50 auto humidity report interval from 1% ~ 50% 4 auto light report interval 0,5~50 (set up from 0 for off or 5%~50%) 0 1 0 0 10 from to description 0 50 auto light report interval from off or 5%~50% 5 motion re triggering duration 1 ~ 255 (unsigned decimal) minutes (default: 3 minutes) 0 1 0 0 3 from to description 1 255 motion re triggering duration (in minute) 6 motion sensitivity 1 ~ 7 (default: 4) 0 1 0 0 4 from to description 1 7 motion sensitivity 7 led flash mode selection 1 ~ 3 (mode 1 ~ mode 3) mode 1 led turn off (both temp./pir trigger) mode 2 temp. (breathing light mode) pir (quick flash) mode 3 led quick flash (temp./pir trigger) 0 1 0 0 3 from to description 1 3 led flash mode selection texts
- ID Description Value 4
.jpg)
