- Name
- Siren
- Brand
- WINKA SYSIT
- Features
- Feature Values Supported Notification Types
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0F00
- Categories
- Security Add-Ons
- Product id
- 0x1DB1
- Device type
- Siren
- Oem version
- HW: 16 FW: 1.50
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0F00
- Z wave version
- 6.51.09
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0331
- Product type id
- 0x0003
- Long description
- The Siren can be triggered to sound an alarm and flash its super-bright LEDs when some event occurs. To ensure you never miss important alerts from your smart home system and keep your smart home safe. It can plugs into your wall outlet directly, and there be 5 different alert tones for a range of specific events.
- Hardware platform
- ZM5202
- Short description
- The Siren can be triggered to sound an alarm and flash its super-bright LEDs when some event occurs.
- Product identifier
- WK-0004
- Countries / regions
- European Union
- Certification number
- ZC10-17105814
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported notification types
- Notification Type Event / State Siren
- Value siren association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 5 the sounds indicated number 3 alarm duration this parameter can set the duration of the alarm function after activation. unit of time is: seconds. parameter description: 0 no alarm; 1 ~ 32766 – alarm duration; 32767 – the alarm keeps sending alarm until the user shuts it down. 0 2 0 0 300 from to description 0 32767 second. alarm duration tiem. (second) 4 light alarm mode this parameter can set whether to open different light flashing modes when the alarm is activated. 1 turn off the light when an alarm is sent; 2 the light flashes slowly when an alarm is sent; 3 the light flashes fast when an alarm is sent; 4 the light flashes in the breathing light mode when an alarm is sent. 0 1 0 0 4 from to description 1 4 led pattern number 5 switch binary report disable if the gateway supports notification command class version 6 and versions above, the switch binary report function can be disable so as to reduce the data volume communicating with the gateway and thus improve the communication quality of the network.0 disable; 1 enable. 0 1 0 0 0 from to description 0 1 0 disable, 1 enable 6 alarm disable this parameter can set the enabled and disabled of the alarm function. 0 – disable the alarm function (i.e., the siren will not play sound or turn on led light when the alarm is triggered); 1 – enable the alarm function. 0 1 0 0 1 from to description 0 1 0 disable, 1 enable texts
- ID Description Value 1
