Water Leak Detector

Loading…

Water Leak Detector — ZLINK — Off Screen Space

More specs

Name: Water Leak Detector
Brand: ZLINK
Features: Feature Values Battery Quantity
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_SLEEPING_REPORTING
User icon: 0x0c05
Categories: Sensors
Product id: 0x0001
S2 classes: S2_UNAUTHENTICATED, S2_AUTHENTICATED
Device type: Notification Sensor
Oem version: HW: 255 FW: 50.06
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0c05
Z wave version: 6.81.01
Frequency plans: US: 916.00MHz, 908.40MHz
Manufacturer id: 0x0315
Product type id: 0x0202
Long description: ZL-LD-100 is designed to detect and alert any water leaks in residential or commercial buildings. ZL-LD-100 features an audible buzzer in addition to a wireless alert to your controller providing early notification of water leaks before major damage occurs. - Water sensing cable may be placed anywhere where there is a risk of a leak, horizontal (ﬂoor, attic) or vertical (wall, along pipes), providing 3D capability to sense the leak. - Senses as little as couple of drops of water (0.25ml – 0.5ml) - Provides hundreds of times more coverage vs. traditional single point sensors that only detect leaks in a very localized area. - Quickly senses water leaks (every 400msec with micro USB power supply, every 60 sec. with battery) before expensive damage occurs. - LD-100 reports local temperature once every 60 minutes on battery, when using micro USB power supply it can be set using conﬁguration parameter 3. - Built-in audible buzzer sounds when water is detected. - Includes 4-foot-long sensing cable that senses water on any part of the cable. - Water sensing cable extend-able up to 150 feet with available extensions. - Powered by 3 x AAA batteries (not included) or standard 5V micro USB power supply (not included).
Hardware platform: ZM5101
Short description: ZL-LD-100 is designed to detect and alert any water leaks in residential or commercial buildings.
Product identifier: ZL-LD-100
Countries / regions: United States of America
Supports smart start: Yes
Certification number: ZC10-18096237
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Supported notification types: Notification Type Event / State Water Alarm
Value 3 supported notification types value water alarm battery type value aaa color value white sensors value air temperature moisture firmware updatable value updatable by consumer by rf outdoor use association groups: Group Number Maximum Nodes Supported End Point ID Description 1
From to description 0 2 parameter 2 is for the beep interval when on battery power and on line power during the time water is detected. 0= every 10 minutes 1= every 5 minutes 2= every 30 minutes 4 notification buzzer the buzzer may be disabled when detecting water on line power or battery, using parameter 4, the default value is set to enabled. 1 1 0 1 1 from to description 0 1 the buzzer may be disabled when detecting water on line power or battery, using parameter 4, the default value is set to enabled. texts: ID Description Value 5

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Sensor

More from ZLINK