- Name
- Z-Wave Dual Pet PIR
- Brand
- ABUS
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors, Security Add-Ons, Security Systems
- Product id
- 0x0004
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.01:00.01
- Library type
- SLAVE_ENHANCED_232
- Product line
- Z-Wave 500 series
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.71.03
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0403
- Product type id
- 0x0002
- Long description
- Motion detector It uses Passive Infrared (PIR) technology to detect movement in a defined area by detecting the changes in thermal radiation caused by the moving body inside or outside the detection zone. With the dual PIR sensor (dual-lens technology), the sensor hides pets up to approx. 38kg, so that your pet can move freely without triggering the sensor. When the motion detector is triggered, an alarm signal is sent to the Z-Wave controller. The indicator LED lights up when motion is detected. Integrated temperature and humidity sensor At periodic intervals, the unit automatically sends the measured temperature and humidity value to the Z-Wave controller or on request of the Z-Wave controller. Tamper protection between the device and wall bracket When the housing is opened, the tamper switch is triggered and the device sends a tamper alarm to the Z-Wave controller. The tamper contact must remain pressed for three seconds to reset the tamper alarm.
- Hardware platform
- SD3502
- Short description
- The motion detector uses Passive Infrared (PIR) technology to detect movement in a defined area by detecting the changes in thermal radiation caused by the moving body inside or outside the detection zone.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- Product identifier
- PLBW10000
- Countries / regions
- European Union
- Certification number
- ZC10-20036890
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Supported notification types
- Notification Type Event / State Home Security
- From to description 10 3600 adjustable from 10 3600 in seconds (hexadecimal: 0x10 0x e10) 2 waiting time between two motion alarms waiting time from one motion alarm to the next triggering. 1 2 10 3600 160 from to description 10 3600 adjustable from 10 3600 in seconds (hexadecimal: 0x10 0x e10) 4 temperature report threshold additional temperature report, which is sent when the set threshold is exceeded. 1 1 0 10 5 from to description 0 0 the value 0 deactivates the temperature report. (hexadecimal: 0x00) 1 10 adjustable from 1 10 in 0.5° steps (e.g. 5 = 2.5°, hexadecimal: 0x01 0x0 a) 5 humidity report threshold additional humidity report that is sent when the set threshold is exceeded. 1 1 0 10 5 from to description 0 0 the value 0 deactivates the temperature report. (hexadecimal: 0x00) 1 10 adjustable from 1 10 in 5% steps (e.g. 5 = 25%, hexadecimal: 0x01 0x0 a) 6 led status set whether the status led lights up in case of a motion alarm. 1 1 0 1 1 from to description 0 0 0 = led deactivated (hexadecimal: 0x00) 1 1 1 = led activated (hexadecimal: 0x01) texts
- ID Description Value 8