- Name
- Nexello Outdoor Siren
- Brand
- ABUS
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0F00
- Categories
- Security Add-Ons, Security Systems
- Product id
- 0x0008
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Siren
- Oem version
- HW: 1 FW: 1.01:00.03
- Library type
- SLAVE_ENHANCED_232
- Product line
- Z-Wave Plus 500 series
- Supports nwi
- Yes
- Installer icon
- 0x0F00
- Z wave version
- 6.82.00
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0403
- Product type id
- 0x0003
- Long description
- Fire, breaking and entering or tampering: The ABUS Nexello outdoor siren for protected outdoor areas will sound the alarm at over 100 dB in all cases. On request in addition to or exclusively visually via a red LED. The settings for alarm duration, volume and the siren LED can be flexibly configured. Is the alarm duration too long? Or want the LED of the outdoor siren to alert you of the enabling and disarming of the alarm system? Various parameters can be individually adjusted. The desired configuration is carried out in a few simple steps via ABUS Nexello. The outdoor siren can be operated completely 100% wirelessly using batteries or an external power supply and can be freely positioned using a wall bracket with a set of dowels and screws. It has a cover contact and wall contact as protection against tampering. The siren indicates an imminent battery replacement or power failure, via a push notification to the free Nexello app.
- Hardware platform
- SD3502
- Short description
- Outdoor siren with strobelight and sounder
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Description 1
- Product identifier
- PLSG10100
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC10-20096975
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Supported notification types
- Notification Type Event / State System
- From to description 5 600 adjustable from 5 600 in seconds 4 sabotage alarm defines whether an alarm should be triggered directly in the event of a sabotage alarm. 1 2 0 1 0 from to description 0 0 the siren does not automatically trigger an alarm, the sabotage alarm is triggered by the z wave controller. this function is deactivated by default, because when activated, a sabotage alarm is always triggered directly by the siren, even if the z wave controller/alarm system is in maintenance mode, for example. 1 1 the siren always triggers an alarm automatically, regardless of the status of the z wave controller. note: sabotage alarm will also be triggered while maintenance mode. 2 alarm setting the reaction in case of an alarm. 1 2 0 2 0 from to description 0 0 siren and leds / flash 1 1 siren only 2 2 leds only / flash light 3 siren volume adjusts the volume of the siren. 1 2 0 1 0 from to description 0 0 100d b 1 1 85d b 5 status display setting whether only certain status events should be displayed. 1 2 0 3 0 from to description 0 0 activation & deactivation 1 1 only activation 2 2 only deactivation 3 3 no activation & deactivation texts
- ID Description Value 1
