- Name
- Power Manager
- Brand
- Dawon DNS
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- Categories
- Energy Meters, All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0005
- Device type
- On/Off Power Switch
- Oem version
- 11
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- KR: 920.90MHz, 921.70MHz, 923.10MHz
- Manufacturer id
- 0x018C
- Product type id
- 0x0042
- Long description
- The apparatus can remotely power on/off to the load connected and will inform you of the electricity usage of your load. You can use it to measure the power of the load connected to the device (currently instantaneous power & accumulated power).
- Hardware platform
- WML-C85
- Short description
- This device measures the total amout of accumulated electricity and the amount currently amount of electricity and has the ability to power on or off the connected load.(ex. electric home appliances)
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- PM-B400ZW
- Countries / regions
- Republic of Korea
- Certification number
- ZC10-16010011
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
- Supports explorer frames
- Yes
- From to 1 144 4 connected device use/not use value : 0 connected device not use value : 1 connected device use before setting the standby power it does not report. (this configuration value is used only 0 and 1.) 0 1 0 0 0 from to 0 0 2 peridic measurement value transmission value : 1 periodic measurement value transmission enable value : 0 periodic measurement value transmission disable ( default : periodic measurement value transmission enable ) 0 1 0 0 1 from to 1 1 3 accumulation start/stop value : 0 accumulation stop value : 1 accumulation start ( default : accumulation start ) (this configuration value is used only 0 and 1.) 0 1 0 0 0 from to 0 1 1 standy power setting value 3 byte, standby power enable/disble : 1 byte) value : if the value is set by 300, standby power equals 3.00w (0x00012 c) and standby power enable is 1. total 0x00012 c01 ( default : 0 – 0.00 w, standby power disable) 0 4 0 0 0 from to 0 0 texts
- ID Description Value 1
