HC Dimmer FM — devolo — Off Screen Space

Skip to main content

Loading…

HC Dimmer FM — devolo — Off Screen Space

More specs

Name: HC Dimmer FM
Brand: devolo
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x1C00
Categories: Energy Meters, All Lighting Devices, Dimming Lighting Devices, Fan Control
Product id: 0x0051
Device type: Light Dimmer Switch
Oem version: HW: 4 FW: 3.08:03.10
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x1C00
Z wave version: 6.51.09
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x0175
Product type id: 0x0001
Long description: The HC Dimmer is a MOSFET-switching light device that also supports control of low-voltage halogen lamps with electronic transformers, dimmable compact fluorescent lights, and dimmable LED bulbs. It measures power consumption of the connected device, and can be paired with a digital temperature sensor (sold separately). It supports push-button/momentary switches and toggle switches (default).
Hardware platform: ZM5202
Short description: The HC Dimmer FM is a MOSFET-switching light device that also supports control of low-voltage halogen lamps with electronic transformers, dimmable compact fluorescent lights, and dimmable LED bulbs.
Product identifier: MT 02760
Countries / regions: European Union
Certification number: ZC10-18025988
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Format Size Min Value Max Value Default Value Parameter Values Description 4
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SENSOR_BINARY
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Supported notification types: Notification Type Event / State Power Management
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value white neutral wire required sensors value air temperature acceleration y axis supported meter type value electric energy supported notification types value power management association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 0 no (normally open) input type 1 1 nc (normally close) input type 10 activate / deactivate functions all on / all off 0 2 0 0 255 from to description 0 0 all on is not active, all off is not active 1 1 all on is not active, all off active 2 2 all on active, all off is not active 255 255 all on active, all off active flush dimmer module responds to commands all on / all off that may be sent by the main controller or by other controller belonging to the system. 11 automatic turning off output after set time 0 2 0 0 0 from to description 0 0 auto off disabled 1 32536 = 1second 32536 seconds auto off enabled with define time, step is 1 second automatic turning off output after set time 2 input 2 switch type 0 1 0 0 0 from to description 1 1 bi stable switch type 0 0 mono stable switch type (push button) – button quick press turns between previous set dimmer value and zero note: to enable this function, parameter 20 or parameter 100 has to be set. 3 input 2 contact type 0 1 0 0 0 from to description 0 0 no (normally open) input type 1 1 nc (normally close) input type 42 power reporting in watts by time interval 0 2 0 0 0 from to description 0 0 reporting disabled 1 32767 = 1 second 32767 seconds. reporting enabled. power report is send with time interval set by entered value set value means time interval (0 32767) in seconds, when power report is send. available configuration parameters 60 minimum dimming value 0 1 0 0 1 from to description 1 1 = 1% (minimum dimming value) 1 98 = 1% 98%, step is 1%. minimum dimming values is set by entered value note: the minimum level may not be higher than the maximum level! 1% min. dimming value is defined by z wave multilevel device class. 101 enable / disable endpoints i3 or select notification type and event 0 1 0 0 0 from to description 0 0 endpoint, i3 disabled sensor binary (9): generic type sensor binary, specific type not used 1 1 home security; motion detection, unknown loc. 2 2 co; carbon monoxide detected, unknown loc. 3 3 co2; carbon dioxide detected, unknown loc. 4 4 water alarm; water leak detected, unknown loc. 5 5 heat alarm; overheat detected, unknown loc. 6 6 smoke alarm; smoke detected, unknown loc. 9 9 sensor binary enabling i3 means that endpoint (i3) will be present on ui. disabling it will result in hiding the endpoint according to the parameter set value. additionally, a notification type and event can be selected for the endpoint. available configuration parameters (data type is 1 byte dec): endpoint device type selection: notification sensor (1 6): generic type sensor notification, specific type notification sensor • default value 0 • 1 home security; motion detection, unknown loc. • 2 co; carbon monoxide detected, unknown loc. • 3 co2; carbon dioxide detected, unknown loc. • 4 water alarm; water leak detected, unknown loc. • 5 heat alarm; overheat detected, unknown loc. • 6 smoke alarm; smoke detected, unknown loc. • 0 endpoint, i3 disabled sensor binary (9): generic type sensor binary, specific type not used • 9 sensor binary note1: after parameter change, first exclude module (without setting parameters to default value) then wait at least 30s and then re include the module! note 2: when the parameter is set to value 9 the notifications are send for home security. 110 temperature sensor offset settings 0 2 0 0 32536 from to description 1 100 value from 0.1 degrees celsius to 10.0 degrees celsius is added to actual measured temperature 1001 1100 value from 0.1 degrees celsius to 10.0 degrees celsius is subtracted to actual measured temperature. 32536 32536 offset is 0.0 c set value is added or subtracted to actual measured value by sensor. 120 temperature sensor reporting 0 1 0 0 5 from to description 0 0 reporting disabled 1 127 = 0,1 degrees celsius 12,7 degrees celsius, step is 0,1 degrees celsius 5 5 = 0,5 degrees celsius change if digital temperature sensor is connected, module reports measured temperature on temperature change defined by this parameter. available configuration parameters (data type is 1 byte dec): • default value 5 = 0,5°c change • 0 reporting disabled • 1 127 = 0,1°c 12,7°c, step is 0,1°c 61 maximum dimming value 0 1 0 0 99 from to description 2 99 = 2% 99%, step is 1%. maximum dimming values is set by entered value 99 99 = 99% (maximum dimming value) note: the maximum level may not be lower than the minimum level! 99% max. dimming value is defined by z wave multilevel device class. 65 dimming time (soft on/off) 0 2 0 0 100 from to description 50 255 = 500 mseconds 2550 mseconds (2,55s), step is 10 mseconds 100 100 = 1s set value means time of moving the dimmer between min. and max. dimming values by short press of push button i1 or controlled through ui (basic set). 66 dimming time when key pressed 0 2 0 0 3 from to description 1 255 = 1 second – 255 seconds 3 3 = 3s time of moving the dimmer between min. and max dimming values by continues hold of push button i1 or associated device. 67 ignore start level 0 1 0 0 0 from to description 0 0 respect start level 1 1 ignore start level this parameter is used with association group 3. a receiving device should respect the start level if the ignore start level bit is 0. a receiving device must ignore the start level if the ignore start level bit is 1. 68 dimming duration 0 1 0 0 0 from to description 0 0 dimming duration according to parameter 66 1 127 from 1 to 127 seconds this parameter is used with association group 3. the duration field must specify the time that the transition should take from the current value to the new target value. a supporting device should respect the specified duration value. 100 enable / disable endpoints i2 or select 0 1 0 0 0 from to description 0 0 endpoint, i2 disabled 0 0 1 1 home security; motion detection, unknown loc. 2 2 co; carbon monoxide detected, unknown loc. 3 3 co2; carbon dioxide detected, unknown loc. 4 4 water alarm; water leak detected, unknown loc. 5 5 heat alarm; overheat detected, unknown loc. 6 6 smoke alarm; smoke detected, unknown loc. 9 9 sensor binary enabling i2 means that endpoint (i2) will be present on ui. disabling it will result in hiding the endpoint according to the parameter set value. additionally, a notification type and event can be selected for the endpoint. endpoint device type selection: notification sensor (1 6): generic type sensor notification, specific type notification sensor • default value 0 • 1 home security; motion detection, unknown loc. • 2 co; carbon monoxide detected, unknown loc. • 3 co2; carbon dioxide detected, unknown loc. • 4 water alarm; water leak detected, unknown loc. • 5 heat alarm; overheat detected, unknown loc. • 6 smoke alarm; smoke detected, unknown loc. • 0 endpoint, i2 disabled sensor binary (9): generic type sensor binary, specific type not used • 9 sensor binary note1: after parameter change, first exclude module (without setting parameters to default value) then wait at least 30s and then re include the module! note 2: when the parameter is set to value 9 the notifications are send for home security. 249 enable/disable reporting on set command 0 1 0 0 1 from to description 0 0 disable reporting 1 1 enable reporting 250 unsecure / secure inclusion 0 1 0 0 0 from to description 0 0 unsecure inclusion 1 1 secure inclusion a flush dimmer supports secure and unsecure inclusion. even if the controller does not support security command classes, a dimmer could be included as unsecure and keep all the functionality. 1 input 1 switch type 0 1 0 0 0 from to description 1 1 bi stable switch type 0 0 mono stable switch type (push button) – button quick press turns between previous set dimmer value and zero note: switch connected to s1 terminal is a master switch. it activates the basic functionality of the dimmer texts