- Name
- Eaton’s Z-Wave Plus Wireless Switch
- Brand
- Eaton
- Features
- Feature Values Firmware Updatable
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, Lighting Accessories
- Product id
- 0x0503
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 255 FW: 2.00
- Library type
- SLAVE_ENHANCED_232_NOFLIRS_NOMR
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.71.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x001A
- Product type id
- 0x534C
- Long description
- Eaton’s Z-Wave plus wireless switch replaces regular switches (where a neutral is present) to provide local and remote ON/OFF control for most common residential lighting loads including LEDs and certain motor loads. Each switch can be manually and remotely controlled by commands sent from your compatible Z-Wave certified controller. Features & Benefits: • Replaces standard switch to add local and wireless control • Single pole and 3-Way control: Use with standard 3-Way switch or Z-Wave Plus Accessory RF9617 • Neutral is required for installation • Supports motors loads up to ½ HP • Features blue load indicating LED light that can be dimmed in ON or OFF state
- Hardware platform
- ZM5101
- Short description
- Eaton’s Z-Wave plus wireless switch replaces regular switches (where a neutral is present) to provide local and remote ON/OFF control for most common residential lighting loads including LEDs and certain motor loads.
- Product identifier
- RF9601
- Countries / regions
- United States of America
- Certification number
- ZC10-18096234
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SCENE_ACTUATOR_CONF
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC_V2
- Value updatable by consumer by rf switch load capacity current value 15 a neutral wire required switch type value decorator paddle push with indicator z wave scene type value scene electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led dimmable led inductive (e.g. motor) dimmable fluorescent dimmable mlv (magnetic) dimmable elv (magnetic) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 127 panic on time 3 panic off time the interval when the switch turns off when panic mode is set to on 0 1 0 127 1 from to description 0 127 panic off time 5 power up state power up state allows the users to set the state the device will come on after power is restored. 1 = off 2 = on 3 = last state default is off 0 1 1 3 1 from to description 1 1 turn off when power is back 2 2 turn on when power is back 3 3 default to last state when power is back 6 panic mode enable panic mode allows eaton z wave devices to turn on/off at a press of button. 0 = off 1 = on 0 1 0 1 0 from to description 0 0 panic mode is turned off 1 1 panic mode is turned on 1 delayed off time turn the switch off with a preset delay. the default is 10 seconds. you can set this anywhere between 1 second till 127 seconds. the default is set at 10 0 1 0 127 10 from to description 0 127 delayed off time texts
- ID Description Value 1