- Name
- Motion Sensor
- Brand
- Eaton
- Features
- Feature Values Battery Quantity
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C07
- Categories
- Sensors, Lighting Accessories, Security Add-Ons
- Product id
- 0x0053
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.00:00.05
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.71.01
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x001A
- Product type id
- 0x0042
- Long description
- Eaton's Z-Wave Plus battery operated motion sensor is a versatile motion detector that can be triggered by movement or changes in light level when paired with your Home automation or a Security system. • Detects motion in a space with in-built Passive Infra-red and Light Sensor • When used with a compatible Smart Hub, get alerted on your smart phone or Tablet, trigger scenes or have lights come ON automatically • CR123A Lithium Battery included with the product ~ expected battery life of 2 years • Can be mounted using included screws or double sided tape • 120° field of view with 1032 sq. ft coverage for Major motion • Supports Z-Wave Plus functionality with S2 security certification
- Hardware platform
- SD3502
- Short description
- Eaton's Z-Wave Plus battery operated motion sensor is a versatile motion detector that can be triggered by movement or changes in light level when paired with your Home automation or a Security system.
- Product identifier
- RF96PIRBMS
- Countries / regions
- United States of America
- Certification number
- ZC10-18126337
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Light sensor
- Value 1 supported notification types value luminance battery type value cr123 a 1700m ah color value white sensors value motion/no motion (binary) luminance firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Description 2
- From to description 1 99 basic set level 3 sensitivity level in order to provide the best efficiency of the sensor, it is recommended to test the sensor with movements from the farthest end of the coverage area at first time of use. if movements cannot be detected consistently, simply adjust the sensitivity level with configuration parameter #3. this parameter can be configured with the value of 1 through 10, where 1 means low sensitivity and 10 means high sensitivity. 0 1 0 0 6 from to description 1 10 sensitivity level low (1) to high (10) 4 re trigger interval the re trigger interval setting determines the amount of time between when the sensor will retrigger a signal that motion has been detected. during this time, the sensor will not report motion even though motion may be detected. the time interval can be set between 5 secs to 3600 secs. 0 1 0 0 180 from to description 5 3600 time in seconds texts
- ID Description Value 4