- Name
- Eaton’s Z-Wave Plus Universal Dimmer
- Brand
- Eaton
- Features
- Feature Values Electric Load Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x0501
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 2.00
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.71.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x001A
- Product type id
- 0x4449
- Long description
- Eaton’s Z-Wave plus Universal dimmer replaces regular switches (where a neutral is present) to provide local and remote ON/OFF and Dim UP/Down control for most common residential lighting loads including LEDs and certain motor loads. Each dimmer can be manually and remotely controlled by commands sent from your compatible Z-Wave certified controller. Features & Benefits: • Replaces standard switch to add local and wireless control • Compatible with most common residential lighting loads including LED, CFLs, INC, MLVs, ELVs, HAL. • Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z • Neutral is required for installation • Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cybersecurity • Voice and app based control when used with compatible Z-Wave controller
- Hardware platform
- ZM5101
- Short description
- Eaton’s Z-Wave plus Universal dimmer replaces regular switches (where a neutral is present) to provide local and remote ON/OFF and DIM UP/Down control for most common residential lighting loads including LEDs.
- Product identifier
- RF9640-N
- Countries / regions
- United States of America
- Certification number
- ZC10-18126327
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL_V4
- Value incandescent dimmable led dimmable fluorescent dimmable mlv (magnetic) dimmable elv (magnetic) z wave scene type value scene neutral wire required switch load capacity watts value 300 w firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 1 device stays off 2 2 device stays on 3 3 device reverts to last state 6 panic mode enable enables or disables panic mode 0 1 0 0 0 from to description 0 0 panic mode off 1 1 panic mode on 7 dimmer ramp time time it takes to ramp up the dimmer 0 1 0 0 1 from to description 0 127 choose value between 0 to 127 for dimmer to gradually come on 8 kickstart enable/disable kickstart feature makes the light come on at full brightness before going back to preset 0 1 0 0 0 from to description 0 0 kickstart is disabled 1 1 kick start is enabled 9 reset max/min levels to factory default reset max/min levels to factory default 0 1 0 0 0 from to description 0 0 reset to factory default 11 set minimum dimming level lower end trim setting. higher the value, smaller the dimming range 0 1 0 0 1 from to description 1 99 minimum dim level setting 2 panic on time panic mode on time in seconds 0 1 0 0 1 from to description 0 127 panic on time 3 panic off time panic mode off time in seconds 0 1 0 0 1 from to description 0 127 panic off time 1 delayed off time press and hold the device for 2 seconds to activate delayed off. this allows the user to safely exit the room before lights go off 0 1 0 0 10 from to description 0 127 delayed off time 0 0 texts
- ID Description Value 1
