- Name
- EU Z-WAVE PIR MOTION SENSOR
- Brand
- Ecolink Intelligent Technology
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_REPORTING
- User icon
- 0x0C00
- Categories
- Sensors
- Product id
- 0x0001
- Device type
- Notification Sensor
- Oem version
- HW: 2 FW: 10.01
- Library type
- SLAVE_ENHANCED
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 6.51.06
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x014A
- Product type id
- 0x0004
- Long description
- • For indoor use only • Operating frequency: 908.42 MHz • Operating range: Up to 100 feet (30.5 meters) line-of-sight • Operating temperature: 0˚C to 49˚C, 32˚F to 120˚F (ambient temperature) • Detection radius: 39 feet (see detection region diagram) • Detection angle: 45 degrees in either direction from the sensor’s center • Battery type: 3V Lithium CR123A • Battery life: approximately 3 years • Passive Infrared (PIR) based technology
- Hardware platform
- ZM5202
- Short description
- This Ecolink Pet immunity motion detector is a z-wave plus enabld device designed to smoothly integrate into a Z-Wave Plus home automation network. It will detect motion and will alert your system of any intrusion immediately.
- Product identifier
- H214101
- Countries / regions
- European Union
- Certification number
- ZC10-18056110
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_BASIC
- Supported multilevel sensors
- Multilevel Sensor Type General purpose
- Supported notification types
- Notification Type Event / State Home Security
- Value white battery type value cr123 a supported notification types value home security battery quantity value 1 sensors value motion/no motion (binary) open/closed (binary) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 1 off (00,) on ( 01) 2 motion detected sensory binary report (default) sensor sends sensor binary reports when sensor is faulted and restored for backwards compatibility in addition to notification reports. sensor will send only notification reports and not sensor binary reports when the sensor is faulted and restored. 0 1 0 0 0 from to description 0 1 off (00,) on ( 01) texts
- ID Description Value 1
.png)
