- Name
- Push button 3025
- Brand
- Eelectron SpA
- Features
- Feature Values Switch Load Capacity Current
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x1D04
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x1080
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.06
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x1D04
- Z wave version
- 6.51.10
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x031F
- Product type id
- 0x0001
- Long description
- 3025 push button is a 4 channels switch with 1 integrated 10A 250V relay, compliant with 55x55 systems. Equipped with 1 RGB Led for buttons feedback and relay status. The device can control electrical loads or dimmerable actuators. The module is controlled either through the Z-Wave network or a simple switch. Designed to replace your conventional switch and control the connected load. The device works with 3-wires system, so neutral is required.
- Hardware platform
- ZM5202
- Short description
- Four channels pushbutton for lighting control with 1 integrated 10A 250V relay and 1 RGB Led for feedbacks. Compliant with 55x55 systems.
- Product identifier
- SB41CxxZWE
- Countries / regions
- European Union
- Certification number
- ZC10-17055609
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
- Value 10 neutral wire required firmware updatable value updatable by consumer by rf switch type value push button with indicator electric load type value incandescent fluorescent mlv (magnetic) elv (electronic) led inductive (e.g. motor) association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 0 relay controlled by button 1 3 0 relay controlled by button 3 2 0 relay controlled by button 2 4 0 relay controlled by button 4 0 0 none of the buttons controls the local load 5 led feedback defines which events trigger led feedback. the value to be entered for this parameter it’s calculated as the sum of the values associated with the individual entities indicated in table. 0 1 0 0 3 from to description 1 0 led reporting state of the relay 2 0 feedback on press button 60 status at power on status after device restart. 0 1 0 0 4 from to description 1 0 local relay close 2 0 local relay open 4 0 keep status before power down 61 configuration reset define which parameters will be set to factory defaults. 0 1 0 0 4 from to description 1 0 all and only the associations are reset 2 0 the associations are preserved while all other parameters of configuration will be reset to factory defaults, except this one that remains unchanged 3 0 device will be restarted 4 0 no action is carried out 2 control of devices linked with groups 2,3,4,5,6,7,8,9 defines in which cases the control of the linked devices will be activated with a "click" of a configured button. in order to control devices linked to a group these devices have to belong to this group. 0 1 0 0 3 from to description 2 0 the associated devices will always be controlled by a click of one of the four buttons 3 0 the associated devices will be controlled only from those buttons that aren’t associated to the local load 1 0 the possible associations will ignored and associated devices will be not controlled texts