Double Switch 2 — FIBARO — Off Screen Space

Skip to main content

Loading…

Double Switch 2 — FIBARO — Off Screen Space

From to description 0 0 alarm frame is ignored 1 1 turn on after receiving the alarm frame 2 2 turn off after receiving the alarm frame 3 3 flash after receiving the alarm frame 44 flashing alarm duration this parameter allows to set duration of flashing alarm mode. 0 2 0 0 600 from to description 1 32000 1 32000s, 1s step 51 first channel minimal time between power reports this parameter determines minimum time that has to elapse before sending new power report to the main controller. 0 1 0 0 10 from to description 0 0 periodic reports are disabled 1 120 (1 120s) report interval 10 first channel operating mode this parameter allows to choose operating for the 1st channel controlled by the s1 switch. 0 1 0 0 0 from to description 0 0 standard operation 1 1 delay on function 2 2 delay off function 3 3 auto on function 4 4 auto off function 5 5 flash function 11 first channel reaction to switch for delay/auto on/off modes this parameter determines how the device in timed mode reacts to pushing the switch connected to the s1 terminal. 0 1 0 0 0 from to description 0 0 cancel mode and set target state 1 1 no reaction to switch mode runs until it ends 2 2 reset timer start counting from the beginning 17 second channel time parameter for delay/auto on/off modes this parameter allows to set time parameter used in timed modes. 0 2 0 0 50 from to description 0 0 0.1s 1 32000 1 32000s, 1s step 31 s1 switch switch on value sent to 2nd and 3rd association groups this parameter defines value sent with switch on command to devices associated in 2nd and 3rd association group. note *hold and release is inactive when parameter 20 is set to 1 or 2. **double click is inactive when parameter 20 is set to 1. 0 2 0 0 255 from to description 0 0 turning off associated devicessent value 1 99 forcing level of associated devices 255 255 setting associated devices to the last remembered state or turning them on 41 reaction to flood alarm this parameter determines how the device will react to flood alarm frame. 0 1 0 0 2 from to description 0 0 alarm frame is ignored 1 1 alarm frame is ignored 2 2 turn off after receiving the alarm frame 3 3 flash after receiving the alarm frame 9 restore state after power failure this parameter determines if the device will return to state prior to the power failure after power is restored. 0 1 0 0 1 from to description 1 1 the device restores its state prior to the power failure 0 0 the device does not save the state prior to the power failure and returns to „off” position 42 reaction to co/co2/smoke alarm this parameter determines how the device will react to co, co2 or smoke frame. 0 1 0 0 3 from to description 0 0 alarm frame is ignored 1 1 turn on after receiving the alarm frame 2 2 turn off after receiving the alarm frame 3 3 flash after receiving the alarm frame 53 first channel energy reports this parameter determines the minimum change in consumed energy that will result in sending new energy report to the main controller. 0 2 0 0 100 from to description 0 0 reports are disabled 1 32000 1 32000 (1 32000 wh) change in energy 55 second channel minimal time between power reports this parameter determines minimum time that has to elapse before sending new power report to the main controller. 0 1 0 0 10 from to description 0 0 periodic reports are disabled 1 120 (1 120s) report interval 57 second channel energy reports this parameter determines the minimum change in consumed energy that will result in sending new energy report to the main controller. 0 2 0 0 100 from to description 0 0 reports are disabled 1 32000 1 32000 (1 32000 wh) change in energy 58 periodic power reports this parameter determines in what time intervals the periodic power reports are sent to the main controller. 0 2 0 0 3600 from to description 0 0 periodic reports are disabled 1 32000 (1 32000s) report interval 59 periodic energy reports this parameter determines in what time intervals the periodic energy reports are sent to the main controller. 0 2 0 0 3600 from to description 0 0 periodic reports are disabled 1 32000 (1 32000s) report interval 60 measuring energy consumed by the device itself this parameter determines whether energy metering should include the amount of energy consumed by the device itself. results are being added to energy reports for first endpoint. 0 1 0 0 0 from to description 0 0 function inactive 1 1 function activate texts