- Name
- Z-Wave Wall Dimmer
- Brand
- HomeSeer
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3034
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 50.03
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.81.00
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x000C
- Product type id
- 0x4447
- Long description
- - Works with incandescent and dimmable florescent (CFL) and LED lighting - ON/OFF/DIM status LED indicator - Fits into standard single or multiple gang junction box - Keypad can be replaced manually to match color with other wall switches - Over-The-Air firmware upgrade available with compatible gateway, Z-Wave static controller, or PC and software - Internal resettable fuse to protect from surge current - Manual reset capability - Supports Central Scene - Supports S2 Security
- Hardware platform
- ZM5202
- Short description
- HS-WD100+ In Wall Dimmer Switch - Replaces existing wall switch or dimmer - Remotely or manually turns On, Off, or dim lights - Z-Wave Plus certified with 500 series chipset - Functions as a Z-Wave signal repeater - Supports Central Scene - Supports S2 Security
- Product identifier
- HS-WD100+
- Countries / regions
- United States of America
- Supports smart start
- Yes
- Certification number
- ZC10-18036076
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 10
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_CENTRAL_SCENE_V3
- Value white electric load type value incandescent dimmable led dimmable fluorescent dimmable mlv (magnetic) switch load capacity watts value 600 watts incandescent neutral wire required outdoor use switch type value decorator paddle rocker z wave scene type value scene & central scene firmware updatable value updatable by consumer by rf association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 1 255 indicates the time duration of each level. 8 turning on or off the lights via remote control or scheduled program turning on or off the lights via remote control or scheduled program valid values: 1 255 (default = 3), indicates the time duration of each level when the light is controlled by remote 0 2 0 0 3 from to description 1 255 indicates the time duration of each level when the light is controlled by remote 9 indicates the number of levels the time interval of brightness change between dimming up and down can be adjusted length: 1 byte valid values: 1 99 (default = 1), indicates the number of levels the lighting will change when the timer runs out. 0 1 0 0 1 from to description 1 99 indicates the number of levels the lighting will change when the timer runs out. 7 turning on or off the lights via remote control turning on or off the lights via remote control valid values: 1 99 (default = 1), indicates the number of levels when the light is controlled by remote. lower this number, the finer the control of dimming. higher the number the faster the dimming 0 1 0 0 1 from to description 1 99 indicates the number of levels when the light is controlled by remote 4 the orientation of the on/off on the rocker switch the orientation of the on/off on the rocker switch can be inverted 0 1 0 0 0 from to description 1 1 the connected light will turn off by pressing the top side of the rocker switch and turn on by pressing the bottom side. 0 0 the connected light will turn on by pressing the top side of the rocker switch and turn off by pressing the bottom side. texts
