- Name
- Z-Wave Multi-Sensor HSM200
- Brand
- HomeSeer
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- Categories
- Sensors
- Product id
- 0x0001
- Device type
- Notification Sensor
- Oem version
- 1
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.03
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x001E
- Product type id
- 0x0004
- Long description
- The HSM200 senses motion, temperature and light level, can function as a night light, and can also be programmed to display up to 7 different glowing colors when things happen in the home! Since the HSM200 is line powered, there are no batteries to change and the unit automatically operates as a Z-Wave network repeater. Installation is fast and easy. Just plug into any available 120v outlet and tap the button on the side to join it to your Z-Wave network. HSM200 is compatible with any HomeSeer HS3-based system, including the full line of HomeTrollers, and Z-Wave systems from 3rd parties. HomeSeer users can create events to display different colors when motion is sensed, doors are opened, water leaks are detected or just about anything else happens in the home. Color options include red, green, blue, yellow, magenta, cyan and white. The unit can also be programmed to work as a night light after hours.
- Hardware platform
- ZM5202
- Short description
- Z-Wave Plug-In Multi-Sensor • Motion Sensor • Temperature Sensor • Light Level Sensor • Color Indicator/Night Light supporting multiple colors • Wall Powered • Z-Wave Range Extender • Z-Wave Plus™ Platform • Over-the-Air Firmware Updatable
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- HSM200
- Countries / regions
- United States of America
- Certification number
- ZC10-15020009
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- From to description 1 99 dim level 1 1 on 1 on time on time sets the number of minutes that the lights stay on when motion has not been detected. a value of 0 is a special mode where the lights are constantly sent a command to turn them on whenever motion is detected. the hsm200 will not turn the lights off in this mode. recommended values: 5 min for hallways 20 min for an office environment 60 min for a library, office or other room where someone may be sitting still for a long time 0 1 0 0 10 from to description 1 127 minutes of no motion before off sent 0 0 send only on every time motion is detected 3 lite min a luminance report is sent to the system controller every lite min minutes if the value has changed by more than 5% since the last reading. a value of zero turns this mode off. luminance values can still be obtained at any time by the home control application in this mode. 0 1 0 0 60 from to description 1 127 minutes between light level reports 0 0 disable 4 temp min a temperature report is sent to the system controller every temp min minutes if the value has changed by more than 0.5 f since the last reading. a value of zero turns this mode off. temperature values can still be obtained at any time by the home control application in this mode. 0 1 0 0 60 from to description 0 0 disable 1 127 minutes between temperature reports 5 temp adj temp adj is a twos complement number that is used to adjust the temperature reading to make it more accurate. the value is in tenths of degree fahrenheit. the temperature reading can be adjusted up to +12.7 f to 12.8 f. a value of 1 will adjust the temperature reading by +0.1 f. a value of 1 will adjust the temperature by 0.1 f. a value of 123 will adjust the temperature by +12.3 f. 0 1 0 0 0 from to description 127 128 temperature adjust by 1/10th this value texts