- Name
- In-Wall Dimmer Switch
- Brand
- HomeSeer
- Features
- Feature Values Z-Wave Scene Type
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0600
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3034
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255 FW: 5.15
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0600
- Z wave version
- 6.51.08
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x000C
- Product type id
- 0x4447
- Long description
- - Works with incandescent and dimmable florescent (CFL) or most LED lighting - ON/OFF status and location LED indicator - Fits into standard single or multiple gang junction box - Keypad can be replaced manually to match color with other wall switches - Over-The-Air firmware upgrade available with compatible gateway, Z-Wave static controller, or PC and software - Internal resettable fuse to protect from surge current - Manual reset capability - Support Central Scene
- Hardware platform
- ZM5202
- Short description
- HS-WD100+ In Wall Dimmer Switch - Replaces existing wall switch - Remotely or manually turns On, Off, or dim lights - Fits standard wall plates - Z-Wave Plus certified with 500 series chipset - Functions as a Z-Wave signal repeater - Support Central Scene
- Product identifier
- WD-100
- Countries / regions
- United States of America
- Certification number
- ZC10-17085738
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_CENTRAL_SCENE_V2
- Value scene & central scene color value white outdoor use firmware updatable value updatable by consumer by rf electric load type value incandescent dimmable led dimmable fluorescent dimmable mlv (magnetic) dimmable elv (magnetic) switch load capacity watts value 600 watts incandescent neutral wire required switch type value decorator paddle rocker association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 the connected light will turn on by pressing the top side of the rocker switch and turn off by pressing the bottom side. 1 1 the connected light will turn off by pressing the top side of the rocker switch and turn on by pressing the bottom side. 7 turning on or off the lights via remote control turning on or off the lights via remote control valid values: 1 99 (default = 1), indicates the number of levels when the light is controlled by remote. lower this number, the finer the control of dimming. higher the number the faster the dimming 0 1 0 0 1 from to description 1 99 indicates the number of levels when the light is controlled by remote 8 turning on or off the lights via remote control or scheduled program turning on or off the lights via remote control or scheduled program valid values: 1 255 (default = 3), indicates the time duration of each level when the light is controlled by remote 0 2 0 0 3 from to description 1 255 indicates the time duration of each level when the light is controlled by remote 9 indicates the number of levels the time interval of brightness change between dimming up and down can be adjusted length: 1 byte valid values: 1 99 (default = 1), indicates the number of levels the lighting will change when the timer runs out. 0 1 0 0 1 from to description 1 99 indicates the number of levels the lighting will change when the timer runs out. 10 indicates the time duration of each level the time interval of brightness change between dimming up and down can be adjusted valid values: 1 255 (default = 3), indicates the time duration of each level. 0 2 0 0 3 from to description 1 255 indicates the time duration of each level. texts
