- Name
- Plug-in Smart Dimmer, Dual Outlet with Simultaneous Control
- Brand
- Jasco Products Company
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- Categories
- All Lighting Devices, Dimming Lighting Devices
- Product id
- 0x3033
- Device type
- Light Dimmer Switch
- Oem version
- HW: 255
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Z wave version
- 6.51.06
- Frequency plans
- US: 916.00MHz, 908.40MHz
- Manufacturer id
- 0x0063
- Product type id
- 0x5044
- Long description
- Transform any home into a smart home with the Jasco Z-Wave Smart Lighting Control Plug-in Smart Dimmer. The lamp module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more! Use the dimmer control to customize the lighting output and create the perfect ambiance for any room. The space-saving horizontal module plugs into a standard wall receptacle without blocking the second outlet or obstructing placement of furniture. The Dimmer provides two Z-Wave enabled outlets for the lamps you would like to control. Perfect for two lamps on either side of a couch, table, or bed! Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls!
- Hardware platform
- ZM5202
- Short description
- Transform any home into a smart home with the Jasco Z-Wave Smart Lighting Control Plug-in Smart Dimmer.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- Product identifier
- 14280 (ZW3107)
- Countries / regions
- United States of America
- Certification number
- ZC10-15080017
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 3
- Supports explorer frames
- Yes
- From to description 0 0 led light on when z wave tunred off (default) 1 1 led light on when z wave turned on 2 2 led light always off 7 dim rate dim rate 0 1 0 0 1 from to description 1 99 number of steps or levels 0 0 8 dim rate adjustments (from z wave controller) timing of steps please note: values should be entered using their singed values only, which means for example that a configuration value of 1 byte in size must have values in the range 128 to 127. values specified here above or below the range specified by the values size need to be converted to their 2's compliment value, or if your controller supports it, may be entered using hexadecimal notation. 0 1 0 0 3 from to description 1 255 timing of the steps 0 0 9 dim rate adjustments (when manually controlled) dim rate adjustments (when manually controlled ) 0 1 0 0 1 from to description 1 99 number of steps or levels 0 0 11 dim rate adjustments (when receiving all on/all off command) 0 1 0 0 1 from to description 1 99 number of steps of levels 0 0 10 dim rate adjustments (when manually contolled) please note: values should be entered using their signed values only, which means for example that a configuration value of 1 byte in size must have values in the range 128 to 127. values specified here above or below the range specified by the value's size need to be converted to their 2's compliment value, or if your controller supports it, may be entered using hexadecimal notation. 0 1 0 0 3 from to description 1 255 timing of the steps 0 0 texts
- ID Description Value 1
