- Name
- Siren
- Brand
- LG Uplus
- Features
- Feature Values Firmware Updatable
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0F00
- Categories
- Security Add-Ons
- Product id
- 0x0001
- Device type
- Siren
- Oem version
- HW: 18 FW: 39.32
- Library type
- SLAVE_ENHANCED_232
- Supports nwi
- Yes
- Installer icon
- 0x0F00
- Z wave version
- 6.51.08
- Frequency plans
- KR: 920.90MHz, 921.70MHz, 923.10MHz
- Manufacturer id
- 0x022C
- Product type id
- 0x004E
- Long description
- Siren will detect the movement of people or animals in real time and then report it to Z-Wave gateway (LTE Router) through the Z-Wave protocol. It Will be used with AA Battery, Battery life time is 1year. And it can be installed easily by using double side tape.
- Hardware platform
- ZM5101
- Short description
- Siren can detect the movement by infrared sensor or can detect the movement along with open sensor. Alarm will be sounded once movement is detected. A Z-Wave controller can be used for adjusting sound of alarm, or to turn it on/off, etc.
- Product identifier
- SIR-01
- Countries / regions
- Republic of Korea
- Certification number
- ZC10-16075141
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Controlled command classes
- Identifier Name Key Version COMMAND_CLASS_SWITCH_BINARY
- Value updatable by professional/technician switch type value push button battery quantity value 2 battery type value aa battery outdoor use ip (ingress protection) rated color value white association groups
- Group Number Maximum Nodes Supported End Point ID Description 1
- From to description 0 0 the alarm sound is muted 1 5 the alarm sound is set to level 1 through 5 (maximum) 3 alarm operating time control this parameter sets the time that the alarm will operate when it is triggered. 0 1 0 0 0 from to description 0 0 1 minute 1 1 5 minutes 2 2 10 minutes 3 3 15 minutes 4 4 20 minutes 4 alarm sound preview this parameter provides a 3 second preview of the alarm sound. use value 128 or hex value 0x ff. 0 1 0 0 0 from to description 128 128 alarm operating (3 sec) 1 alarm function on/off enables or disables the alarm function. to enable, use the hex value 0x ff which is 128. 0 1 0 0 0 from to description 0 0 alarm function off 128 128 alarm function on texts
- ID Description Value 1
