Ness Z-Wave LUX PIR Sensor — Ness — Off Screen Space

Skip to main content

Loading…

Ness Z-Wave LUX PIR Sensor — Ness — Off Screen Space

From to description 10 10 disable motion alarm report 11 3600 enable motion alarm report 2 motion alarm retrigger modes this option will select how the motion alarm retrigger duration timer (cpn#1) to be reset. range: 0~1. value = 0, in this mode, the motion alarm retrigger duration timer (cpn#1) will be reset to zero once the motion event is detected. hence, the motion alarm retrigger duration timer will start recounting which extends the retrigger duration. this mode will extend the battery life and reduce unnecessary motion alarm reports (default). value = 1, in this mode, the motion alarm retrigger duration timer (cpn#1) would not be reset once the motion event has detected. the motion alarm reports will be enabled to send once the motion alarm retrigger duration timer has expired. in this mode, it will report the motion alarm event with greater fidelity. this setting might be used where the device will be used for automation tasks. 2 yes 1 0 1 0 from to description 0 0 motion alarm retrigger duration timer (cpn#1) will be reset to zero once the motion event is detected 1 1 motion alarm retrigger duration timer (cpn#1) would not be reset once the motion event has detected yes 3 motion clear duration the period of time in seconds to send motion clear report after motion alarm has reported in security mode. range: 0~3600; default: 10; value = 0 disable motion clear report. 2 yes 2 0 3600 10 from to description 0 0 disable motion clear report 1 3600 enable motion clear report 4 low battery setting report battery low warning message when battery level reaches this value (percentage). range: 10~50 (10%~50%) 2 yes 1 10 50 10 from to description 10 50 low warning message when battery level reaches this value 6 luminance change threshold this parameter determines the change in lux of light intensity level resulting in sending luminance report. range: 0~60 (lux). default: 50. value = 0 disable luminance value scanning, no report. note: the luminance value is scanned every 5 seconds. a luminance report will be sent if a change over the set threshold value is detected. 2 yes 1 0 60 50 from to description 0 0 disable luminance value scanning, no report 1 60 lux luminance value yes 7 temperature change threshold this parameter determines the change in temperature value resulting in sending temperature value report. range: 0~80 (10 = 1.0 °c or °f; 20 = 2.0 °c). value > 0 and <10 set as 10. default: 10. value = 0 disable temperature value scanning, no report. note: the temperature value is scanned every 5 minutes. a temperature report will be sent if a change over the set threshold valueis detected. 2 1 0 80 10 from to description 0 10 no report sent 11 80 temperature range from 1 80°c yes 8 temperature scheduled report interval the temperature value report interval time is based on 30 minutes per kick. the value n related to the time in minutes is n x 30 minutes. range: 0~120. default: 6 (6x30 =180 minutes). value = 0 disable temperature scheduled report. 2 yes 1 0 120 6 from to description 0 0 disable temperature scheduled report 1 120 n x 30 minutes temperature scheduled report yes 9 temperature scale setting option to select the temperature scale type reported in celsius or fahrenheit. range: 0~1. value = 0 celsius (c): value = 1 fahrenheit (f). 2 yes 1 0 1 0 from to description 0 0 celsius 1 1 fahrenheit 10 night light on duration range: 0~1. value = 0 night light on for 10 seconds (default). value = 1 night light on for 30 seconds. 2 yes 1 0 1 0 from to description 0 0 night light on for 10 seconds 1 1 night light on for 30 seconds yes 11 night light on based on ambient light level meas range: 0~1. value = 0 night light on only when sense detects total darkness (default). value = 1 night light on only when a small amount of light is detected. 2 yes 1 0 1 0 from to description 0 0 night light on only when sense detects total darkness (default) 1 1 night light on only when a small amount of light is detected yes texts