Skip to main content

Loading…

Plug-Control E/F — Nice — Off Screen Space

Off Screen Space

Plug-Control E/F

Nice · Plug Switch

Plug-Control E/F

View all Nice products

Connectivity: Z-WaveCategory: Plug Switch

Z-WaveCertified

Plug-Control is a universal, Z-Wave Plus™ compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2500W load. Plug-Control is equipped with a power and energy metering function. It uses a LED ring to visualize the current load with colour changing illumination and operating mode. This is the smallest and most attractive device of this type available in the world. Plug-Control may be operated using the B-button located on its casing or via any Z-Wave™ compatible controller.

Want to buy adds it to your wish list and follows Nice for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 2 FW: 3.02:03.02

Specifications

Overview

Company: Nice
Category: Plug Switch
Device type: On/Off Power Switch

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.51.07
Z-Wave frequency: EU: 869.85MHz, 868.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: Plug-Control E/F
Brand: Nice
Features: Feature Values Color
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0700
Categories: All Lighting Devices, On/Off Switches/Devices, All Controllers, Computer Controller Interfaces
Product id: 0x1003
Device type: On/Off Power Switch
Oem version: HW: 2 FW: 3.02:03.02
Library type: SLAVE_ENHANCED_232
Product line: Nice Plug-Control E/F
Supports nwi: Yes
Installer icon: 0x0700
Z wave version: 6.51.07
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x010F
Product type id: 0x0602
Long description: Plug-Control is a universal, Z-Wave Plus™ compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2500W load. Plug-Control is equipped with a power and energy metering function. It uses a LED ring to visualize the current load with colour changing illumination and operating mode. This is the smallest and most attractive device of this type available in the world. Plug-Control may be operated using the B-button located on its casing or via any Z-Wave™ compatible controller.
Hardware platform: ZM5202
Short description: Plug-Control is a universal, Z-Wave Plus™ compatible, remotely controlled outlet adapter. This device may be applied wherever you want to control electrical devices with up to 2500W load.
Product identifier: FGWPx-102
Countries / regions: European Union
Certification number: ZC10-22047083
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V5
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC
Supported multilevel sensors: Multilevel Sensor Type Power
Supported notification types: Notification Type Event / State Power Management
Value white association groups: Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
Supported / controlled meter types: Meter Type Rate Type Description Electric meter

From to description 0 0 function inactive 1 1 function activated 3 overload safety switch this function allows to turn off the controlled device in case of exceeding the defined power. controlled device will be turned off even if “always on” function is active (parameter 1). controlled device can be turned back on via b button or sending a control frame. by default this function is inactive. caution! the device has a protection that will turn the load off in the case of detecting current greater than 110% of rated current (>12 a). it is a safety function and it cannot be turned off. after its activation the load can be turned on back again by pressing the b button or sending a control frame. this function is independent of overload safety switch set in the parameter no. 3. 1 2 0 30000 0 from to description 0 0 function inactive 10 30000 (1.0 3000.0 w, step 0.1 w) power threshold 10 high priority power report this parameter determines the minimum percentage change in active power that will result in sending power report to the main controller with the highest priority in the z wave network. by default, plug control immediately sends the power report if the power load changes by 80%. 1 1 1 100 80 from to description 1 99 power change in percent 100 100 reports are disabled 2 remember device status before the power failure this parameter determines how plug control will react in the event of power supply failure (e.g. power outage or taking out from the electrical outlet). after the power supply is back on, plug control can be restored to previous state or remain switched off. this parameter is ignored in „always on” mode the device automatically turns on after plugging it into the socket. 1 1 0 1 0 from to description 0 0 device remains switched off 1 1 device restores the state from before the power failure 23 the response after exceeding defined power values this parameter defines the way that 3rd association group devices are controlled. depends on the actual measured power (as parameters 21 and 22 settings). 1 1 1 6 6 from to description 1 1 turn the associated devices on, once the power drops below down value (parameter 21) 2 2 turn the associated devices off, once the power drops below down value (parameter 21) 3 3 turn the associated devices on, once the power rises above up value (parameter 22) 4 4 turn the associated devices off, once the power rises above up value (parameter 22) 5 5 combination of 1 and 4. turn the associated devices on, once the power drops below down value (parameter 21). turn the associated devices off, once the power rises above up value (parameter 22). 6 6 combination of 2 and 3. turn the associated devices off, once the power drops below down value (parameter 21). turn the associated devices on, once the power rises above up value (parameter 22). 24 switch on value „on/off” association groups the value of basic set command frame sent to the devices associated in „on/off” association groups (2, 3). „on/off (button)” association group in accordance with parameter 20. „on/off (power)” association group in accordance with parameter 23. 1 2 0 255 255 from to description 0 99 sent value 255 255 sent value 31 response to alarm frames this parameter defines how plug control will respond to alarms (device’s status change). in case of values 1 or 2 plug control is operating normally and led ring signals an alarm through time defined in parameter 32 or until the alarm is cancelled. in case of values 5 to 50 plug control does not report status change, power changes, ignores basic set command frames. after time defined in parameter 32 or after the alarm cancellation, connected device is set to the previous state. 1 1 0 50 0 from to description 0 0 no reaction 1 1 turn connected device on 2 2 turn connected device off 5 50 (0.5 5.0 s, step 0.1 s) cyclically change device state with set period 41 led ring colour when controlled device is on when set to 1 or 2, led ring colour will change depending on active power and parameter 40. other colours are set permanently and do not depend on power consumption. 1 1 0 9 1 from to description 6 6 blue 8 8 cyan 3 3 white 7 7 yellow 9 9 magenta 0 0 illumination turned off completely 1 1 colour changes continuously depending on active power 4 4 red 2 2 colour changes in steps depending on active power 5 5 green 43 led ring colour at the z wave network alarm detection this parameter defines the illumination colour in case of z wave alarm. 1 1 0 9 2 from to description 0 0 illumination turned off completely 1 1 no change in colour. led ring colour is determined by settings of parameters 41 or 42 2 2 led ring flashes red/blue/white 3 3 white 4 4 red 5 5 green 6 6 blue 7 7 yellow 8 8 cyan 9 9 magenta 42 led ring colour when controlled device is off this parameter defines the illumination colour after turning off. 1 1 0 9 0 from to description 9 9 magenta 8 8 cyan 7 7 yellow 6 6 blue 5 5 green 4 4 red 3 3 white 0 0 illumination turned off completely 1 1 led ring is illuminated with a colour corresponding to the last measured power, before the controlled device was turned off 50 associations in z wave network security mode this parameter defines how commands are sent in specified association groups: as secure or non secure. parameter is active only in z wave network security mode. this parameter does not apply to 1st „lifeline” group. 1 1 0 3 3 from to description 0 0 none of the groups sent as secure 1 1 2nd group sent as secure 2 2 3rd group sent as secure 3 3 2nd and 3rd group sent as secure texts