Thermostat — RCS — Off Screen Space

Skip to main content

Loading…

Thermostat — RCS — Off Screen Space

More specs

Name: TBZ500 Thermostat
Brand: RCS
Features: Feature Values Battery Type
Is flirs: Yes
Documents: Category Description File Adv_Manual
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x1200
Categories: Thermostats
Product id: 0x5439
S2 classes: S2_UNAUTHENTICATED
Device type: Thermostat - HVAC
Oem version: HW: 4 FW: 6.08:03.00
Library type: SLAVE_ROUTING
Product line: Thermostat
Supports nwi: Yes
Installer icon: 0x1200
Z wave version: 6.82.00
Frequency plans: US: 916.00MHz, 908.40MHz
Manufacturer id: 0x0010
Product type id: 0x5442
Long description: The TBZ500 Z-Wave Plus Thermostat is a programmable, Z-Wave communicating thermostat with S2 Security and SmartStart. It can be powered using 24VAC, or using four (4) AA batteries. Using Z-Wave technology, end users have the ability to use most compatible Z-Wave hubs/controllers to operate and animate the thermostat, configure programming settings, as well as to display current conditions in the home or office.
Hardware platform: ZM5202
Short description: The TBZ500 Z-Wave Plus Thermostat is a programmable, Z-Wave communicating thermostat with S2 Security and SmartStart. 24VAC or Battery Powered.
Product identifier: TBZ500
Countries / regions: United States of America
Supports smart start: Yes
Certification number: ZC10-20066926
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 11
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SENSOR_MULTILEVEL_V5
Supported multilevel sensors: Multilevel Sensor Type Air temperature
Value aa battery quantity value 4 firmware updatable value updatable by consumer by rf thermostat hvac systems supported value heat only cool only single stage multi stage heat pump thermostat modes value heat cool auto auxiliary/emergency heat fan only auto changeover thermostat power source value battery power stealing (hard wired 24 v) external transformer association groups: Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1

From to description 1 6 degrees 43 remote sensor 1 node number used to set the node id for the remote sensor you want to use temperature from. 1 2 0 255 0 from to description 0 0 disabled 1 255 node id 3 change over type select whether your change over valve switches with heat or with cool call. 1 1 0 1 0 from to description 0 0 change over with cool 1 1 change over with heat 174 cpu runtime used for reading out the number of seconds the cpu has been running when on battery. 1 4 0 1073741823 0 from to description 0 1073741823 read only 46 parameter 25 used to read out the last known temperature sent to us from the node set in configuration parameter 43. 1 1 0 127 0 from to description 0 127 read only 48 internal sensor temp offset used to set a calibration offset to the internal temperature sensor. 1 1 7 7 0 from to description 7 7 degrees 49 r1 sensor temp offset used to set a calibration offset to the remote temperature sensor. 1 1 7 7 0 from to description 7 7 degrees 171 number of heat call starts used for reading out the number of heat calls that have started. 1 4 0 1073741823 0 from to description 0 1073741823 read only 172 number of cool call starts used for reading out the number of cool calls that have started. 1 4 0 1073741823 0 from to description 0 1073741823 read only 173 reboot count used for reading out the number of times the thermostat has rebooted. 1 4 0 1073741823 0 from to description 0 1073741823 read only 175 autosend wakeup count used for reading out the number of times the thermostat has woken up to send autosends. 1 4 0 1073741823 0 from to description 0 1073741823 read only 179 battery bank voltage returns the current measured remaining battery level as a percentage. 1 1 0 100 0 from to description 0 100 read only 4 2nd stage heat enable enable if your system has a second heat stage. 1 1 0 1 0 from to description 0 0 disabled 1 1 enabled 5 aux heat enable enable if your system has an auxillary heat stage. 1 1 0 1 1 from to description 0 0 disabled 1 1 enabled 1 system type used to select the hvac system. 1 1 0 1 0 from to description 0 0 standard 1 1 heat pump 2 fan type select the fan type that your hvac system has. 1 1 0 1 0 from to description 0 0 gas(no fan with heat) 1 1 electric(fan with heat) 6 2nd stage cool enable enable if your system has a second cool stage. 1 1 0 1 0 from to description 0 0 disabled 1 1 enabled 7 c/f type used to put the thermostat in celsius or fahrenheit mode. 1 1 0 1 1 from to description 0 0 celsius 1 1 fahrenheit 8 mot used to set the minimum off time that the heat pump compressor must be off before starting another call. 1 1 5 9 5 from to description 5 9 time in minutes 9 mrt used to set the minimum run time that the heat pump compressor must be on before ending a call. 1 1 3 9 3 from to description 3 9 time in minutes 17 c delta stage 1 on the amount of degrees from the cool setpoint that will trigger the stage 1 cool to turn on. 1 1 1 6 1 from to description 1 6 degrees 24 display lock when set the display is locked. 1 1 0 1 0 from to description 0 0 unlocked 1 1 locked 170 send autosends with acks used to enable or disable sending the ack request with an autosend. 1 1 0 1 1 from to description 1 1 send with ack request 0 0 send with no ack request 61 fan purge heat amount of time to keep fan on after a heat call to blow out the residual heat left in the vents. 1 1 0 90 0 from to description 0 90 seconds 62 fan purge cool amount of time to keep fan on after a cool call to blow out the residual cold air left in the vents. 1 1 0 90 0 from to description 0 90 seconds 176 ui wakeup count used for reading out the number of times the thermostat has been woken up due to a button press. 1 4 0 1073741823 0 from to description 0 1073741823 read only 181 battery stat shutdown threshold set the percent battery level at which the thermostat will shut itself down. 1 1 0 50 0 from to description 0 50 percent 222 runtime stage 2 heat used for reading out the stage 2 heat runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 184 battery midlevel indicator threshold set the percent battery level at which the thermostat will indicate mid battery. 1 1 50 80 50 from to description 50 80 percent 221 runtime stage 1 heat used for reading out the stage 1 heat runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 185 batter report timer used to set the amount of days between each battery report. 1 1 0 10 1 from to description 0 0 disabled 1 10 days 225 runtime stage 2 cool used for reading out the stage 2 cool runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 231 status display used to select what you want to be shown on the status line of the display. 1 1 0 1 1 from to description 0 0 rh is displayed 1 1 setpoints are displayed 187 periodic temp send interval used to set how many minutes between temperature report autosends. 1 1 0 120 0 from to description 0 0 disabled 1 120 time in minutes 224 runtime stage 1 cool used for reading out the stage 1 cool runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 186 temp delta autosend threshold used to set how many degrees change in temperature from the last autosend before sending another autosend. 1 1 1 5 1 from to description 1 5 degrees 223 runtime aux heat used for reading out the aux heat runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 194 rh delta autosend threshold used to set how much change in percent rh from the last autosend before sending another autosend. 1 1 1 50 5 from to description 1 50 percent 227 runtime standby used for reading out the standby time in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only 195 periodic rh send interval used to set how many minutes between rh report autosends. 1 1 0 120 0 from to description 0 0 disabled 1 120 time in minutes 226 runtime fan only used for reading out the fan only runtime in seconds. 1 4 0 1073741823 0 from to description 0 1073741823 read only texts