Dimming Switch Module (Dual mode)

Name

Brand

Remotec

Features

Feature Values Color

Documents

Category Description File Manual_Primary_Lang

Role type

ROLE_TYPE_SLAVE_ALWAYS_ON

User icon

0x0600

Categories

All Lighting Devices, On/Off Switches/Devices

Product id

0x8131

S2 classes

S2_UNAUTHENTICATED

Device type

Light Dimmer Switch

Oem version

HW: 1 FW: 0.32

Library type

SLAVE_ENHANCED_232

Supports nwi

Yes

Installer icon

0x0601

Z wave version

6.71.01

Frequency plans

US: 916.00MHz, 908.40MHz

Manufacturer id

0x5254

Product type id

0x8200

Long description

ZDS-220 enabled product allows users to remotely control lighting, home appliance, and make home control easy with low installation and maintenance costs. You may begin with a few Z-Wave enabled devices as well as some of our products to build up a complete home automation system. The ZDS-220 is a Z-Wave enabled device and is fully compatible with any Z-Wave Plus enabled network. It can be configured as either a “DIMMER” or a “SWITCH” device. It allows remote Dimming or ON/OFF control of specified lamps. Each module is designed to act as a repeater, which will re-transmit a radio frequency (RF) signal by routing the signal around obstacles and radio dead spots to ensure that the signal is received at its intended destination. ZDS-220 is a security enabled Z-Wave plus device. A security Enabled Z-Wave Plus Controller must be used in order to fully utilize the product.

Hardware platform

ZM5202

Short description

The ZDS-220 can be configured as either a “DIMMER” or a “SWITCH” device. It allows remote Dimming or ON/OFF control of specified lamps.

Product identifier

ZDS-220NA

Countries / regions

United States of America

Certification number

ZC10-19086723

Radio range z wave (m)

40

Configuration parameters

Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 5

Supports explorer frames

Yes

Supported command classes

Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4

Value white electric load type value incandescent fluorescent dimmable led firmware updatable value updatable by consumer by rf switch load capacity watts value dimmer mode : 330 w ; switch mode : 500 w association groups

Group Number Maximum Nodes Supported End Point ID Group Name Description Profile 1

From to description 0 0 not save 1 1 save 17 time to move the dimmer from 0% to max. dimming values time to move the dimmer from 0% to max. dimming values. (the zds 220 will implement the dimming duration if received this parameter value from controller/gateway.otherwise, the zds 220 will implement the local parameter value) dimmer mode: from 0 to 5 seconds step size = 1 second 0 1 0 0 3 from to description 0 5 seconds texts

ID Description Value 8