- Name
- Motion Detector v2 EU
- Brand
- Ring
- Is flirs
- Yes
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_SLEEPING_LISTENING
- User icon
- 0x0C07
- Categories
- Sensors
- Product id
- 0x0301
- S2 classes
- S2_UNAUTHENTICATED, S2_AUTHENTICATED
- Device type
- Notification Sensor
- Oem version
- HW: 1 FW: 1.08:01.04
- Library type
- SLAVE_ENHANCED_232
- Product line
- Ring Alarm
- Supports nwi
- Yes
- Installer icon
- 0x0C07
- Z wave version
- 7.12.4
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0346
- Product type id
- 0x0301
- Long description
- Ring Alarm Motion Detector is a wireless sensor for the Ring Alarm system which provides users the ability to know when there is movement of a person or similar object within an area. After installing the sensor and setting up the sensor in the Ring app, monitor and receive notifications motion is detected. The Ring Alarm Base Station is required to enable Motion Detector features and functions within the Ring app.
- Hardware platform
- EFR32Z
- Short description
- Ring Alarm Motion Detector is a wireless sensor for the Ring Alarm system which provides users the ability to know when there is movement of a person or similar object within an area.
- Association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 1
- Product identifier
- Motion Detector v2 EU
- Countries / regions
- European Union
- Supports smart start
- Yes
- Certification number
- ZC12-21040218
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Flag Advanced Size Min Value Max Value Default Value Parameter Values 1
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_CONFIGURATION_V4
- Supported notification types
- Notification Type Event / State Home Security
- From to description 1 70 this parameter indicates the time between heartbeats in minutes. 2 application retriess number of application level retries attempted for messages either not acked or messages encapsulated via supervision get that did not receive a report. 2 yes 1 0 5 1 from to description 0 5 this parameter indicates the number of application level retries. 3 application level retry base wait time period the number base seconds used in the calculation for sleeping between retry messages. 2 yes 1 1 96 5 from to description 1 96 this parameter indicates the number base seconds used in the calculation for sleeping between retry messages. 4 led indicator enable this parameter allows a user, via software, to configure the various led indications on the device. 0 == don't show green 1 == show green after supervision report intrusion (fault) 2 == show green after supervision report both intrusion and intrusion clear 2 yes 1 0 2 1 from to description 0 2 this parameter allows a user to configure led indications on the device. 5 runtime occ clear delay delay time in seconds for occupancy signal to clear 2 yes 1 0 255 0 from to description 0 255 delay time in seconds for occupancy signal to clear 6 runtime intrusion clear delay delay time in seconds for intrusion signal to clear 2 yes 1 0 255 0 from to description 0 255 delay time in seconds for intrusion signal to clear 7 runtime std clear delay standard delay time in seconds 2 yes 1 0 255 0 from to description 0 255 this parameter is the standard delay time in seconds 8 motion detection mode adjusts motion sensitivity 2 yes 1 0 4 3 from to description 0 4 this parameter adjusts motion sensitivity 9 lighting enabled enable or disable light sensor 2 yes 1 0 1 0 from to description 0 1 this parameter is used to enable or disable light sensor 10 lighting delay delay used to turn off lights when motion is no longer detected 2 yes 1 0 60 2 from to description 0 60 this parameter indicates the delay used to turn off lights when motion is no longer detected. 11 supervisory report timeout the number of milliseconds waiting for a supervisory report response to a supervisory get encapsulated command from the sensor before attempting a retry. 2 yes 2 500 30000 10000 from to description 500 30000 this parameter indicates the number of milliseconds waiting for a supervisory report. texts
-scaled.jpg)
.png)