Wheel Controller

Loading…

Wheel Controller — SE Devices — Off Screen Space

More specs

Name: Wheel Controller
Brand: SE Devices
Features: Feature Values Thermostat HVAC Systems Supported
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x1600
Categories: Hospitality, Thermostats, All Lighting Devices, Lighting Accessories
Product id: 0x1003
S2 classes: S2_UNAUTHENTICATED
Device type: Wall Controller
Oem version: HW: 30 FW: 3.00:03.00
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x1600
Z wave version: 6.71.01
Frequency plans: EU: 869.85MHz, 868.40MHz
Manufacturer id: 0x024F
Product type id: 0x0003
Long description: The SE Devices Wheel Controller Z-Wave is a modular Wall-Box mountable control wheel, which is controllable over a Z-Wave Home Automation Network. The device can be added to and remote controlled via a Z-Wave Home Automation network. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. The Wheel Controller unit itself can be combined with a Back Unit hidden inside a wall-box to provide local control possibilities. It can also operate in a Stand-Alone mode, powered via a Cascade connector to another unit (Multifunction Switch or Wheel Controller). There are a variety of Back Units available for the Wheel, which can provide Local control functionality such as Relay Control and Dimming. The Wheel is backed by 4 push buttons, located at the Upper, Lower, Left and Right sides of the wheel. By pushing on these points of the wheel, the various functions of the wheel can be accessed and controlled. The Wheel can be rotated in a clockwise and counter clockwise direction to control the Light Level, adjust temperature settings for the Thermostat and issue Central Scene commands. The current operation is shown in the display at all times. When used as a Thermostat, the display will show information on thermostat operation when the device is Idle.
Hardware platform: ZM5202
Short description: Rotary Wheel Wall Controller for controlling a Heating Zone, Central Scenes and up to four separate Light Zones.
Product identifier: FWC
Countries / regions: European Union
Certification number: ZC10-18046079
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 6
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_SWITCH_MULTILEVEL
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_THERMOSTAT_MODE
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value heat only thermostat modes value heat auxiliary/emergency heat thermostat power source value mains powered (120 v/240 v) z wave scene type value central scene electric load type value incandescent elv (electronic) led dimmable led firmware updatable value updatable by professional/technician neutral wire required sensors value air temperature power voltage current color value white switch type value rotary knob supported meter type value electric energy association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 32767 safety off period in seconds 11 dimmer mode defines if dimmer should operate in leading or tailing edge mode. most lights work quite ok in the default leading edge mode, but this mode also usually cause some noise from the dimmer unit. during installation it is therefore recommended to try te mode, and use this if the light operates properly. tailing edge mode is known to cause instability in some type of lights! this configuration does not have an effect on 1 10 v dimmer back units! 0 = leading edge mode (le) 1 = tailing edge mode (te) 0 1 0 0 0 from to description 0 1 dimmer operation mode 64 temperature report inteval defines the periodic report interval for temperature readings. this can be configured to a minimum of 60 seconds and maximum of (32767 seconds. a 0 value disables the interval based periodic reporting, and any value below 60 results in a 60 second interval. 0 2 0 0 600 from to description 0 32767 report interval in seconds 66 temperature report threshold defines a temperature change threshold where a temperature report is sent regardless of the report interval. this also works if the report interval is disabled. the value is given in 1/10 of a degree celsius, and can be in the range 1 127. a zero value disables the threshold. 0 1 0 0 10 from to description 0 127 report threshold in 1/10th of a degree celcius 67 thermostat on∕off interval override threshold defines a temperature threshold at which the configured on/off interval is overridden and the heating relay state will change regardless. the value is given in 1/10th of a degree, supporting a max threshold of 12.7 degrees celcius. a zero (0) value disables this feature (the default) 0 1 0 0 0 from to description 0 127 temperature threshold in 1/10th of a degree celcius 240 floor sensor temperature offset defines an offset to the floor temperature, given as a signed integer at 1/10 of a degree celcius. this provides an offset range of –12.8 to +12.7 degrees celcius ( 128 to 127). 0 1 0 0 0 from to description 128 127 temperature offset in 1/10th of a degree celcius 241 room sensor temperature offset defines an offset to the room temperature, given as a signed integer at 1/10 of a degree celcius. this provides an offset range of –12.8 to +12.7 degrees celcius ( 128 to 127). 0 1 0 0 0 from to description 1 4 selected back unit light zone 128 127 temperature offset in 1/10th of a degree celcius 4 safety activate delay safety mode is activated after the configured number of seconds has elapsed. it will start by turning off the back unit when activated. a 0 value disables safety mode. the max limit is 32767 seconds (9 hours, 6 minutes and 7 seconds). the minimum actication delay is 60 seconds, and values from 1 to 59 will automatically be translated to a 60 second delay. 0 2 0 0 0 from to description 0 32767 safety activate delay in seconds 17 back unit role configures the role of the back unit, which dictates what local functionality controls it. valid configuration values are: 0 the thermostat will control the back unit (if the back unit is a dimmer, then this value has no effect as thermostats requires a relay to function) 1 the light control feature (buttons) will control the back unit. 2 disconnected mode means the back unit is not controlled by any local ui or features, and can only be controlled via z wave end point 5 (or non channel encapsulated commands). 0 1 0 0 1 from to description 0 2 selected back unit role 1 hardware combination identifier readonly byte which uniquely describes the combination of front and back unit in the current installation. the first nibble (4 bits) identifies the controlling unit (front unit), which is always 0x3 for the wheel controller. the combined byte then yields the following: 0x30 2 pole 8 a relay 0x31 1 10 v dimmer 0x32 230 v mosfet dimmer 0x33 1 pole 16 a relay 0x3 f no back unit connected 0 1 0 0 63 from to description 48 63 depending on the hardware combination texts

Connectivity

Firmware

Specifications

Overview

Connectivity

Certification & compliance

Community tags

Community

Edit history

Firmware & software

Identity & commercial

Lifecycle

More specs

Similar Thermostat

More from SE Devices