- Name
- SIR 321
- Brand
- Secure
- Features
- Feature Values Color
- Documents
- Category Description File Manual_Primary_Lang
- Role type
- ROLE_TYPE_SLAVE_ALWAYS_ON
- User icon
- 0x0700
- Categories
- All Lighting Devices, On/Off Switches/Devices
- Product id
- 0x0003
- S2 classes
- S2_UNAUTHENTICATED
- Device type
- On/Off Power Switch
- Oem version
- HW: 1 FW: 1.00
- Library type
- SLAVE_ROUTING
- Product line
- Heating and Controls
- Supports nwi
- Yes
- Installer icon
- 0x0700
- Z wave version
- 6.82.01
- Frequency plans
- EU: 869.85MHz, 868.40MHz
- Manufacturer id
- 0x0059
- Product type id
- 0x0010
- Long description
- SIR 321 is a Z-Wave Plus countdown timer with one relay and support of duration base schedule that can be used to control any electrical appliances rated up to 3 kW. With an external temperature sensor, SIR 321 can measure room temperature and send temperature report on regular interval or delta temperature change as per configuration. It forms part of central heating control system, it can be operated by any third party controllers using ‘Binary Switch command class’ commands. SIR 321 will act as a repeater once added into the Z- Wave network, providing an alternative communication route for units which otherwise would not be within communication distance of each other. SIR 321 has a fail-safe mode where by the relay is turned OFF if another 'Binary switch SET' or 'Basic SET' command has not been received within 60 minutes.
- Hardware platform
- ZM5202
- Short description
- SIR 321 is a Z-Wave Plus countdown timer having one relay and support of duration base schedule that can be used to control any electrical appliances, it can measure and report room temperature.
- Product identifier
- MAX10Y-376
- Countries / regions
- European Union
- Certification number
- ZC10-20127001
- Radio range z wave (m)
- 40
- Configuration parameters
- Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 2
- Supports explorer frames
- Yes
- Supported command classes
- Identifier Name Key Version COMMAND_CLASS_POWERLEVEL
- Supported multilevel sensors
- Multilevel Sensor Type Air temperature
- Value white switch load capacity watts value 3000 watts firmware updatable value not updatable ip (ingress protection) rated switch load capacity current value 13 amps resistive or 3 amps inductive association groups
- Group Number Maximum Nodes Supported End Point ID Group Name Profile Description 3
- From to description 0 127 unsolicited multilevel sensor report in °c scale 128 255 unsolicited multilevel sensor report in °f scale 5 cut off temperature when temperature reaches at cut off temperature point than relay will be switched off. in case of °f scale: minimum value is 320 and maximum value is 2120 (in 0.1 °f resolution) 1 2 0 1000 0 from to description 0 0 cut off temperature feature is disable 1 1000 cut off temperature value in °c (in 0.1 °c resolution) 1 enable/disable fail safe timer for any non zero value fail safe timer of 60 minutes starts after valid 'switch binary set' or 'basic set' command, timer is reloaded with 60 minutes on every successful communication with the controller. in case of communication failure with the controller for 60 minutes. fail safe timer will switch off the relay and communication failure indicated on rf led. 1 1 127 127 0 from to description 127 1 enable fail safe timer. 0 0 diable fail safe timer. 1 127 enable fail safe timer. 4 delta configuration temperature report configuration of delta temperature for delta temperature change based reporting. in case of °f scale: minimum value is 0 and maximum value is 500 (in 0.1 °f resolution) 1 2 0 100 0 from to description 0 0 delta temperature reporting is disable 1 100 delta temperature value in °c (in 0.1 °c resolution) texts
- ID Description Value 1