Skip to main content

Loading…

5-Outlet Power Strip — Zooz — Off Screen Space

Off Screen Space

5-Outlet Power Strip

Zooz · Plug Switch

5-Outlet Power Strip

View all Zooz products

Connectivity: Z-WaveCategory: Plug Switch

Z-WaveCertified

FEATURES: - Z-Wave on/off control of up to 5 electrical devices - On/off (charging/charged) reports from USB ports to the hub (no Z-Wave control) - turn off the charging device for best results - Energy monitoring for each of the 5 outlets - Built-in overload protection and ETL certification - Z-Wave Plus signal repeater to extend network range - S2 security protocol and the latest 500 Z-Wave chip for faster and safer wireless communication SPECS: - Model Number: ZEN20 VER. 2.0 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC - Maximum Load: 15 A total (between 5 outlets) - Maximum Load for USB ports: 2.1 A total (between 2 ports) - Cord Length: 2 feet - Range: Up to 100 feet line of sight - Installation and Use: Indoor only

Want to buy adds it to your wish list and follows Zooz for updates. I own it adds it to your collection.

Compare

vs Competitor ▾

Connectivity

Z-Wave

Firmware

Current version HW: 1 FW: 1.00

Specifications

Overview

Company: Zooz
Category: Plug Switch
Device type: Power Strip

Connectivity

Standard / protocol: Z-Wave
Connectivity: Z-Wave
Transport: Z-Wave
Spec version: 6.71.03
Z-Wave frequency: US: 916.00MHz, 908.40MHz

Certification & compliance

Certificate ID

Community tags

Be the first to tag this page — tags appear right away. Try a theme, capability, or subject (e.g. WWII, heist, slow burn, time travel, A24).

More specs

Name: 5-Outlet Power Strip
Brand: Zooz
Features: Feature Values Supported Meter Type
Documents: Category Description File Manual_Primary_Lang
Role type: ROLE_TYPE_SLAVE_ALWAYS_ON
User icon: 0x0800
Categories: All Lighting Devices, On/Off Switches/Devices
Product id: 0xA004
S2 classes: S2_UNAUTHENTICATED
Device type: Power Strip
Oem version: HW: 1 FW: 1.00
Library type: SLAVE_ENHANCED_232
Supports nwi: Yes
Installer icon: 0x0800
Z wave version: 6.71.03
Frequency plans: US: 916.00MHz, 908.40MHz
Manufacturer id: 0x027A
Product type id: 0xA000
Long description: FEATURES: - Z-Wave on/off control of up to 5 electrical devices - On/off (charging/charged) reports from USB ports to the hub (no Z-Wave control) - turn off the charging device for best results - Energy monitoring for each of the 5 outlets - Built-in overload protection and ETL certification - Z-Wave Plus signal repeater to extend network range - S2 security protocol and the latest 500 Z-Wave chip for faster and safer wireless communication SPECS: - Model Number: ZEN20 VER. 2.0 - Z-Wave Signal Frequency: 908.42 MHz - Power: 120 VAC - Maximum Load: 15 A total (between 5 outlets) - Maximum Load for USB ports: 2.1 A total (between 2 ports) - Cord Length: 2 feet - Range: Up to 100 feet line of sight - Installation and Use: Indoor only
Hardware platform: ZM5202
Short description: Control 5 devices independently and monitor 2 USB ports via Z-Wave with this S2 Power Strip.
Product identifier: ZEN20 VER. 2.0
Countries / regions: United States of America
Certification number: ZC10-18116311
Radio range z wave (m): 40
Configuration parameters: Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1
Supports explorer frames: Yes
Supported command classes: Identifier Name Key Version COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Controlled command classes: Identifier Name Key Version COMMAND_CLASS_BASIC_V2
Supported notification types: Notification Type Event / State Power Management
Supported / controlled meter types: Meter Type Rate Type Description Electric meter
Value electric energy supported notification types value power management electric load type value incandescent led firmware updatable value updatable by consumer by rf switch load capacity current value 15 a (total between 5 outlets) color value white association groups: Group Number Maximum Nodes Supported End Point ID Description 1

From to description 0 0 power strip remembers the status for each outlet prior to power outage and turns back to it 1 1 power strip automatically turns on for each outlet once power is restored (it does not remember the status prior to power outage) 2 2 power strip automatically turns off each outlet once power is restored (it does not remember the status prior to power outage) 5 overload protection set the watt level for overload protection to kick in. the number entered as the value corresponds to the total number of watts the strip needs to detect across all 5 outlets to turn off automatically and send a notification to the hub. 0 2 0 0 1800 from to description 0 0 overload protection disabled 1 1800 watts 6 enable/ disable auto turn off timer for ch1 use this parameter to enable or disable the auto turn off timer for ch1 outlet. if this feature is enabled, the device connected to ch1 outlet will automatically turn off after a fixed period of time from being turned on (set in parameter 7). 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 7 set auto turn off timer for ch1 use this parameter to set the time after which you want the device connected to ch1 outlet to automatically turn off once it has been turned on. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 1 65535 minutes 8 enable/ disable auto turn on timer for ch1 use this parameter to enable or disable the auto turn on timer for ch1 outlet. if this feature is enabled, the device connected to ch1 outlet will automatically turn on after a fixed period of time from being turned off (set in parameter 9). 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 9 set auto turn on timer for ch1 use this parameter to set the time after which you want the device connected to ch1 outlet to automatically turn on once it has been turned off. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 0 0 1 65535 minutes 23 set auto turn off timer for ch5 use this parameter to set the time after which you want the device connected to ch5 outlet to automatically turn off once it has been turned on. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 1 65535 minutes 10 enable/ disable auto turn off timer for ch2 use this parameter to enable or disable the auto turn off timer for ch2 outlet. 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 11 set auto turn off timer for ch2 use this parameter to set the time after which you want the device connected to ch2 outlet to automatically turn off once it has been turned on. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 1 65535 minutes 2 power wattage report value threshold choose how you want your power strip to report power consumption to your hub. the number entered as value corresponds to the number of watts the appliance needs to go over for the change to be reported. so if 5 watts are entered by default, the smart plug will report any change in power usage over 5 watts for each outlet (whether it’s at least 5 watts more or 5 watts less compared to previous report). 0 4 0 0 5 from to description 0 0 power meter disabled 1 65535 watts 17 set auto turn on timer for ch3 use this parameter to set the time after which you want the device connected to ch3 outlet to automatically turn on once it has been turned off. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 0 0 1 65535 minutes 24 enable/ disable auto turn on timer for ch5 use this parameter to enable or disable the auto turn on timer for ch5 outlet. 0 1 0 0 0 from to description 0 0 timer disabled 1 1 timer enabled 25 set auto turn on timer for ch5 use this parameter to set the time after which you want the device connected to ch5 outlet to automatically turn on once it has been turned off. the number entered as value corresponds to the number of minutes. 0 4 0 0 60 from to description 1 65535 minutes texts